Angular contact thrust ball bearings 234440&Gcr15 material 234440 bearings
USD $28.29 - $28.29 /Piece
Min.Order:100 Pieces
Jinan Kelunte Bearing Co., Ltd.
Angular contact thrust ball bearings 234440&Gcr15 material 234440 bearings
Descriptions of 234440 bearings
234440 bearings are designed to handle axial loads while operating at high speed. Bearings are composed of bearing rings with raceway grooves for the balls. Double direction thrust ball bearings can support axial load in both directions. Neither style can be subjected to radial loads. Available in bore dimension range from 10mm to 560mm.
234440 bearings consist of shaft washer, a housing washer and a ball and cage thrust assembly. They are separable which means that mounting is simple. They can accommodate axial loads in one direction only and must not be subjected to any radial load.
234440 bearings are classified into those with flat seats or aligning seats depending on the shape of the outer ring seat (housing washer). They can sustain axial loads but no radial loads. For Single-Direction Thrust Ball Bearings, pressed steel cages and machined brass cages are usually used The cages in Double- Direction Thrust Ball Bearings are the same as those in Single-Direction Thrust Ball Bearings of the same diameter series.
Single direction thrust ball bearings consist of a shaft washer, a housing washer and a ball and cage assembly. These bearings can only handle thrust loads in one direction.
Double direction 234440 bearings consist of two housing washers, two ball and cage assemblies and one shaft washer. These bearings can handle thrust loads from two directions.
Type of thrust ball bearing | 1. Single way thrust ball bearing 2. Double way thrust ball bearing 3. Flat thrust ball bearing
|
Application | Crane hook, vertical pumps, vertical centrifugal, lifting jack, low speed reducer, |
Component | Seat, shaft ring and ball cage |
Single way thrust ball bearing | Seat, shaft ring and ball cage, separate |
Cage: pressed steel, Injection of glass fiber reinforced nylon 6. 1.One-piece machine cutting brass cage 2.One-piece machine cutting copper steel cage 3.Modular machine cutting brass cage
| |
Flat thrust ball bearing | Low speed, long life |
Application:1.the elevator parts/plastic machinery 2.office equipment/medical apparatus and instruments 3.Stepper motor/deceleration speed change device 4.Pressure rotor/fitness and sports equipment |
(Brand) | CLUNT 234440 bearings | |
(Series) | doubel directions thrust ball bearings | |
(Bearing NO) | 234440 bearings | |
(Basic size) :mm | inner diameter | 200 |
outer diameter | 310 | |
thickness | 132 | |
(Basic load ratings) :KN | dynamic load rating (Cr) | 265 |
static load rating (C0r) | 1100 | |
(Limiting Speeds) :N(1/min) | grase lubrication (Grease) | 1900 |
oil lubrication (Oil) | 2400 | |
(Mass) | 31,0 kg | |
(Detail) | angular contact thrust ball bearings 234440 |
Lubrication of 234440 bearings
234440 bearings can be lubricated with oil or grease. Higher speeds can be achieved with oil lubrication. In order to allow oil to flow between the two rows of balls, the housing locating washer has a lubrication groove and lubrication holes.
At high speeds, overlubrication of the radial bearing can be prevented if the installation space is separated between the axial angular contact ball bearing and the cylindrical roller bearing.
Featurs of 234440 bearings
234440 Bearings of this type consist of the washers with raceway and the assembly of ball and cage. The washer that contacts the shaft is called shaft washer, and the one attached to the housing is called housing washer.
234440 bearings in double directions have a central washer connected to the shaft. Single direction bearings can carry axial load in one direction, and double direction bearings can carry axial load in two directions. The bearings with housing washer which has speherical mounting surface is self-alignable, which can reduce the effects of mounting error.
Model numbers of thrust ball bearings
BEARING NO. | d(mm) | D(mm) | T(mm) | Cr(KN) | Cor(KN) | Grease(r/min) | oil(r/min) | WEIGHT(KG) |
51103 | 17 | 30 | 9 | 10.8 | 18.2 | 5300 | 7500 | 0.024 |
51104 | 20 | 35 | 10 | 14.2 | 24.5 | 4800 | 6700 | 0.036 |
51105 | 25 | 42 | 11 | 15.2 | 30.2 | 4300 | 6000 | 0.055 |
51106 | 30 | 47 | 11 | 16 | 34.2 | 4000 | 5600 | 0.062 |
51107 | 35 | 52 | 12 | 18.2 | 41.5 | 3800 | 5300 | 0.077 |
51108 | 40 | 60 | 13 | 26.8 | 62.8 | 3400 | 4800 | 0.11 |
51109 | 45 | 65 | 14 | 27 | 66 | 3200 | 4500 | 0.14 |
51110 | 50 | 70 | 14 | 27.2 | 69.2 | 3000 | 4300 | 0.15 |
51111 | 55 | 78 | 16 | 33.8 | 89.2 | 2800 | 4000 | 0.22 |
51112 | 60 | 85 | 17 | 40.2 | 108 | 2600 | 3800 | 0.27 |
51113 | 65 | 90 | 18 | 40.5 | 112 | 2400 | 3600 | 0.31 |
51114 | 70 | 95 | 18 | 40.8 | 115 | 2200 | 3400 | 0.33 |
51115 | 75 | 100 | 19 | 48.2 | 140 | 2000 | 3200 | 0.38 |
51116 | 80 | 105 | 19 | 48.5 | 145 | 1900 | 3000 | 0.4 |