Product Details

Thrust bearings 234713 & import Sweden 234713 bearings

Descriptions of 234713 bearings

Bearings types	234713 bearings
new types	234713 bearings
old types	2268113K bearing
products types	234713 bearings
categories	Thrust Ball Bearings
brands	CLUNT
ID d ( mm )	67
OD D ( mm )	100
thickness B ( mm )	44

234713 bearings are designed to handle axial loads while operating at high speed. Bearings are composed of bearing rings with raceway grooves for the balls. Double direction thrust ball bearings can support axial load in both directions. Neither style can be subjected to radial loads. Available in bore dimension range from 10mm to 560mm.

234713 bearings consist of shaft washer, a housing washer and a ball and cage thrust assembly. They are separable which means that mounting is simple. They can accommodate axial loads in one direction only and must not be subjected to any radial load.

234713 bearings are classified into those with flat seats or aligning seats depending on the shape of the outer ring seat (housing washer). They can sustain axial loads but no radial loads. For Single-Direction Thrust Ball Bearings, pressed steel cages and machined brass cages are usually used The cages in Double- Direction Thrust Ball Bearings are the same as those in Single-Direction Thrust Ball Bearings of the same diameter series.

Single direction thrust ball bearings consist of a shaft washer, a housing washer and a ball and cage assembly. These bearings can only handle thrust loads in one direction.

Double direction 234713 bearings consist of two housing washers, two ball and cage assemblies and one shaft washer. These bearings can handle thrust loads from two directions.

1. Thrust ball bearing can handle loads in the axial direction only.

2. Bearing rings mounted on the shaft are called shaft washers, while those mounted in the housing are called housing washers.

3. Both washers contain raceways for the balls.

4. Thrust ball bearings are available as both single an bi-directional types. The bi-directional thrust bearing incorporates a third washer and an additional set of balls.

5. The center washer is located in axial direction by a shaft shoulder and sleeve.

6. Care must be taken in handling to prevent damage to separate rings and ball assemblies.

7. The trust ball bearings are Available in two designs: single direction and double direction.

8. Material: bearing steel, high chrome, carbon steel, stainless steel, ect.

Type of thrust ball bearing	1. Single way thrust ball bearing 2. Double way thrust ball bearing 3. Flat thrust ball bearing
Application	Crane hook, vertical pumps, vertical centrifugal, lifting jack, low speed reducer,
Component	Seat, shaft ring and ball cage
Single way thrust ball bearing	Seat, shaft ring and ball cage, separate
	Cage: pressed steel, Injection of glass fiber reinforced nylon 6. 1.One-piece machine cutting brass cage 2.One-piece machine cutting copper steel cage 3.Modular machine cutting brass cage
Flat thrust ball bearing	Low speed, long life
	Application:1.the elevator parts/plastic machinery 2.office equipment/medical apparatus and instruments 3.Stepper motor/deceleration speed change device 4.Pressure rotor/fitness and sports equipment

Lubrication of 234713 bearings

234713 bearings can be lubricated with oil or grease. Higher speeds can be achieved with oil lubrication. In order to allow oil to flow between the two rows of balls, the housing locating washer has a lubrication groove and lubrication holes.

At high speeds, overlubrication of the radial bearing can be prevented if the installation space is separated between the axial angular contact ball bearing and the cylindrical roller bearing.

Featurs of 234713 bearings

234713 Bearings of this type consist of the washers with raceway and the assembly of ball and cage. The washer that contacts the shaft is called shaft washer, and the one attached to the housing is called housing washer.

234713 bearings in double directions have a central washer connected to the shaft. Single direction bearings can carry axial load in one direction, and double direction bearings can carry axial load in two directions. The bearings with housing washer which has speherical mounting surface is self-alignable, which can reduce the effects of mounting error.

Cages of 234713 bearings

Depending on the bearing series and size, thrust ball bearings are fitted as standard with one of the following cages:

- a pressed steel cage, no designation suffix

- a one-piece machined brass cage, designation suffix M

- a one-piece machined steel cage, designation suffix F

- a two-piece machined brass cage, designation suffix M .

Model numbers of thrust ball bearings

BEARING NO.	d(mm)	D(mm)	T(mm)	Cr(KN)	Cor(KN)	Grease(r/min)	oil(r/min)	WEIGHT(KG)
51103	17	30	9	10.8	18.2	5300	7500	0.024
51104	20	35	10	14.2	24.5	4800	6700	0.036
51105	25	42	11	15.2	30.2	4300	6000	0.055
51106	30	47	11	16	34.2	4000	5600	0.062
51107	35	52	12	18.2	41.5	3800	5300	0.077
51108	40	60	13	26.8	62.8	3400	4800	0.11
51109	45	65	14	27	66	3200	4500	0.14
51110	50	70	14	27.2	69.2	3000	4300	0.15
51111	55	78	16	33.8	89.2	2800	4000	0.22
51112	60	85	17	40.2	108	2600	3800	0.27
51113	65	90	18	40.5	112	2400	3600	0.31
51114	70	95	18	40.8	115	2200	3400	0.33
51115	75	100	19	48.2	140	2000	3200	0.38
51116	80	105	19	48.5	145	1900	3000	0.4

Deep groove ball bearings	Linear ball bearings	Pillow block bearings	Clutch release bearings
Cylindrical roller bearings	Needle roller bearings	Thrust ball bearings	Thrust roller bearings
Spherical roller bearings	Ball joint bearings	Conveyor roller bearings	Angular contact ball bearings