Product Details

Specifications

51318 bearings
1.Gcr15 material
2.Support high loads
3.Separated type
4.ISO:9001:2000

Japan brand bearings 51318 & China made bearings 51318

Descriptions of 51318 bearings

51318 bearings consist of three parts, a shaft and housing washer that have annular grooves in them and a caged ball bearing assembly that is sandwiched in between them. Assembly and mounting is a simple operation as the parts are separate. They support axial loads in one direction. Clearance is provided in the bore of one of the raceways to allow for alignment.

51318 bearings are designed to handle axial loads while operating at high speed. Bearings are composed of bearing rings with raceway grooves for the balls. Double direction thrust ball bearings can support axial load in both directions. Neither style can be subjected to radial loads. Available in bore dimension range from 10mm to 560mm.

51318 bearings consist of shaft washer, a housing washer and a ball and cage thrust assembly. They are separable which means that mounting is simple. They can accommodate axial loads in one direction only and must not be subjected to any radial load.

51318 bearings are classified into those with flat seats or aligning seats depending on the shape of the outer ring seat (housing washer). They can sustain axial loads but no radial loads. For Single-Direction Thrust Ball Bearings, pressed steel cages and machined brass cages are usually used The cages in Double- Direction Thrust Ball Bearings are the same as those in Single-Direction Thrust Ball Bearings of the same diameter series.

Single direction thrust ball bearings consist of a shaft washer, a housing washer and a ball and cage assembly. These bearings can only handle thrust loads in one direction.
51318 bearings are made up of series balls (with cage), a shaft washer (fit tightly with axis), and a house washer, balls are rotating between them. They only bear axial load in one direction, not radial load. As the axial load is evenly distributed on each ball, load capacity is very large. But the temperature is higher during working, allowing speed limit is lower. Thrust ball bearings are separable, single direction thrust ball and double direction thrust ball bearings according to their structures. The former can withstand axial load in one direction, the later can withstand axial load in both directions, but not bear radial load. They have the structure with a seat, and the installation surface is spherical, it has a self-aligning performance and reduces installation errors.

51318 bearings consist of two housing washers, two ball and cage assemblies and one shaft washer. These bearings can handle thrust loads from two directions.

1. Thrust ball bearing can handle loads in the axial direction only.

2. Bearing rings mounted on the shaft are called shaft washers, while those mounted in the housing are called housing washers.

3. Both washers contain raceways for the balls.

4. Thrust ball bearings are available as both single an bi-directional types. The bi-directional thrust bearing incorporates a third washer and an additional set of balls.

5. The center washer is located in axial direction by a shaft shoulder and sleeve.

6. Care must be taken in handling to prevent damage to separate rings and ball assemblies.

7. The trust ball bearings are Available in two designs: single direction and double direction.

8. Material: bearing steel, high chrome, carbon steel, stainless steel, ect.

Type of thrust ball bearing	1. Single way thrust ball bearing 2. Double way thrust ball bearing 3. Flat thrust ball bearing
Application	Crane hook, vertical pumps, vertical centrifugal, lifting jack, low speed reducer,
Component	Seat, shaft ring and ball cage
Single way thrust ball bearing	Seat, shaft ring and ball cage, separate
	Cage: pressed steel, Injection of glass fiber reinforced nylon 6. 1.One-piece machine cutting brass cage 2.One-piece machine cutting copper steel cage 3.Modular machine cutting brass cage
Flat thrust ball bearing	Low speed, long life
	Application:1.the elevator parts/plastic machinery 2.office equipment/medical apparatus and instruments 3.Stepper motor/deceleration speed change device 4.Pressure rotor/fitness and sports equipment

Specifications of 51318 bearings

Basic Dimensions			basic load rating		Old No.	Bearing No.	Limiting Speed		Weight/KG
d	D	H	Cr	Cor	Old No.	Bearing No.	Grease	Oil	Weight/KG
90	155	50	232	517	8318	51318	800	1500	4.02
90	155	50	232	517		51318M	800	1500	4.44

Model Number	51318 bearings
Structure	Thrust
Type	ball
Bore Size	90mm
Outside Diameter	155mm
width	50mm
Seals Type	Open
Material	Ring Material Chrome Steel ,Carbon steel,Stainless steel
Cage material	Nylon ,steel , brass
Greese	As you requirement, such as SRL ,PS2, Alvania R12 and so on .
Number of Row	Single Row
Application	Bearings are mainly used for automobile steering mechanism, machine tool spindle
Package	Single box or according to buyers requirement .
Details	1. Fast delivery
	2. Competitive price
	3. High quality and long life

Lubrication of 51318 bearings

51318 bearings can be lubricated with oil or grease. Higher speeds can be achieved with oil lubrication. In order to allow oil to flow between the two rows of balls, the housing locating washer has a lubrication groove and lubrication holes.

At high speeds, overlubrication of the radial bearing can be prevented if the installation space is separated between the axial angular contact ball bearing and the cylindrical roller bearing.

Featurs of 51318 bearings

1)All raw steel materials purchased from Dalian steel factory(best steel materials in China)

2)All products assembled with strong and various materials cages.

3)All products manufactured according to GB/T18254-2002, GCr15JD and ANHB standard.

4)We do all processes such as steel forging, design,rings/rollers tuning,grinding and whole heat treatments.

5)Advanced bearing production system including super CNC wire cutting machine, LSWEDM, carburizing furnace,glowing furnace,etc.

6)Arc infrared carbon sulfur analyzer for testing steel materials.

7)Fast delivery and best after-sale services.

Bearings of this type consist of the washers with raceway and the assembly of ball and cage. The washer that contacts the shaft is called shaft washer, and the one attached to the housing is called housing washer. Thrust bearings in double directions have a central washer connected to the shaft. Single-direction bearings can carry axial load in one direction, and double-direction bearings can carry axial load in two directions. The bearings with housing washer which has spherical mounting surface is self-alignable, which can reduce the effects of mounting error. Applications of these bearings can be found in steering mechanism of automobiles and machine tool spindles.

Advantages of 51318 bearings