Product Details

Redler conveyor Specifications

1. En masse conveyor (Horizontal or inclined)
2. Multiple inlets and outlets.
3. Full-enclosed structure.

4. ISO,TUV,SEW,FLENDER.

Redler conveyor Operating Principles

When Redler conveyor is running, the pressure which comes from the chains in conveying direction of materials and the weight function of materials themselves cause the internal friction.This friction assures the stable condition between material layers, and it can overcome the external frictional which caused by moving materials in the trough,then make the materials to form a continuous whole flow to be transported.

Redler conveyor special components

1. Scraper chain: Forged links, alloy steel.

2. Head section: The head wheel is made of wheel hubs and tooth blade, tooth blade with strict heat treatment.

3.Middle section: The rectangular closed case, with upper and lower wear guide, materials:65Mn.

4.Tail section: With a tension device.It can adjust the length of chains.

Site pictures

In producing

Main Features

1. Totally enclosed structure, light weight, small volume;

2. Convenient installation and maintenance;

3. Horizontal or slightly inclined transport from 0° to 30°

4. Multiple material inlet and outlet;

5. Conveying distance is up to 75m with material temperature lower than 150°C

Technical Parameters

Type		MS12	MS16	MS20	MS25	MS32	MS40	MS50	MS63
Chute width(mm)		120	160	200	250	320	400	500	630
Chute height(mm)		120	160	200	250	320	400	500	630
Capacity(m3/h)		7-12	11-25	17-39	23-54	48-88	67-124	105-192	166-300
Max conveying distance(m)		50	50	50	50	50	50	50	50
Chain scraper	Type	DT	DT	DT	DT(S30)	S30	Z30	Z30	Z30
	Allowable load(kn)	15	17	26	35(45)	45	75	100	2*75
	Weight(kg/m)	5.5	5.62	7.2	12.2(15.63)	15.63	23.24	25.34	47.6
	Speed(m/s)	0.16-0.32	0.16-0.32	0.16-0.32	0.16-0.32	0.2-0.32	0.2-0.32	0.25-0.32	0.25-0.32