Product Details

---Specifications

1. Redler conveyor(Horizontal or inclined)
2. Strong transport capacity.

3. Multiple inlets and outlets.

4. ISO,TUV,SEW,FLENDER

Coal handling Redler conveyor equipments

Operating Principle

When Redler conveyor is running, the pressure which comes from the chains in conveying direction of materials and the weight function of materials themselves cause the internal friction.This friction assures the stable condition between material layers, and it can overcome the external frictional which caused by moving materials in the trough,then make the materials to form a continuous whole flow to be transported.

Main Features

1. Totally enclosed structure, light weight, small volume;

2. Convenient installation and maintenance;

3. The running speed is very low to reduce the wear degree.

4. Conveying distance is up to 80m with material temperature up to 800°C.

special components

1. Scraper chain: Forged links, alloy steel.

2. Head section: The head wheel is made of wheel hubs and tooth blade, tooth blade with strict heat treatment.

3.Middle section: The rectangular closed case, with upper and lower wear guide, materials:65Mn. Set wear resistant plates on both side plates.

4.Tail section: With a tension device.It can adjust the length of scraper chains.

In producing

Other Redler conveyors

Technical Parameters

Type		RMSM(R)20	RMSM(R)25	RMSM(R)32	RMSM(R)40	RMSM(R)50	RMSM(R)63	RMSM(R)80
Chute width(mm)		200	250	315	400	500	630	800
Chute height(mm)		200	250	315	400	500	500	500
Max chute height (m)		200	288	288	370	473	473	473
Chain scraper	Type	S30		Z30
	Allowable load(kn)	34		75				75
	Weight(kg/m)	13.9	15.6	22.7	25.6	28.7	33	39
	Speed(m/s)	0.05-1			0.06-0.12	0.08-0.12
Capacity(t/h)		3.15-6.3	5-10	6.3-12.5	12.5-25	20-40	25-50	32-64
Max conveying distance(m)		75			50	50		50