HY type walnut filters used for wastewater treatment
USD $3,000 - $45,500 /Set
Min.Order:1 Set
Shandong Jinhaosanyang Environmental Protection Machine Co., Ltd.
HY type walnut filter used for wastewater treatment
Use and brief introduction
Filter is an efficient way to remove the suspended matters in water, however for contain greasy dirt water to adopt general filter the craft effect be very tiny, aim at each big oil-field in the whole country aqueous to the infusion of clean water have more and more high request, my company through continuously investigate of several yearses and research developped to apply oil-field and other to contain oil wastewater treatment of new filter the oil ideal choices which contain greasy dirt water, personal developped a huge function in the oil wastewater treatment of contain of each profession the engineering now.
Characteristics
The product adiotion after specially process of the walnut hull is for the percolation lie quality to have stronger adsorb ability, and filter to anticipate ability anti-wash rebirth, the anti-press ability strong, chemistry function stability, over a long period of time use not to need to be replace, absorb to cut dirty ability strong, anti-wash a rebirth convenience, its biggest characteristics is a direct adoption filter exwater anti-wash, and have never need to ask for help of spirit source and chenmistry medicine, circulate cost low, management convenience, anti-flush strength low, effective, filter to anticipate not easily putrefied, through long enduring, also can according to the fluid matter request, adopt single or the double class establish an usage.
Filter material | Quartz sand | Walnut shell | |
Filter effect | Oil removal rate % | 40-50 | 82-93 |
Ss removal rate % | 50-65 | 85-96 | |
Filter speed(m/h) | 8-12 | 25-30 | |
Back flush strength(L/S.m2) | 16 | 6-7 | |
Filter maintenance way | Replaced every 2-3 years | Supply 10% every year |
Walnut shell filter | Capacity(m3/h) | 12-254 | Outlet quality | |
Design pressure(Mpa) | 0.6 | Primary treatment oil removal rate | ≥60% | |
Work temperature(°C) | 0-60 | Primary treatment oil content(mg/L) | <10 | |
Back wash Period (min) | 5 | Primary treatment SS content(mg/L) | ≤5 | |
Back wash intensity (L/M2.S) | 7 | Secondary treatment oil removal rate | ≥80% | |
Highest filter speed(m/h) | 25 | Secondary treatment oil content(mg/L) | ≤5 | |
Inlet oil content(mg/L) | ≤100 | Secondary treatment SS content(mg/L) | ≤3 | |
Inlet SS content(mg/L) | ≤50 |