Specifications

walnut filter ISO9001
1capacity:10-180m3/h
2.diameter of filter:0.8-3m
3.filter area:0.5-7m2
4.head:35m,power:4kw

HY type walnut filter used for water filter system

Device profile:

HY type filter for walnut oil fields and other oil wastewater treatment of the new filter oil equipment.
This product USES the special processing after the walnut as the filter medium has strong adsorption ability, and filter material can reverse wash regeneration, compressive ability (23.4 KGF/cm2), stable in chemical (not easy in acid, alkali solution dissolve), high hardness. Good abrasion resistance, use for a long time, do not need to change the adsorption cut corrupt capability is strong adsorption rate (53%), 25-hydrophilic good, because of oil and the filter material leaching ratio greater than 1.225 g/cm3 water (wash), the regeneration is convenient, its biggest characteristic is directly used to filter the water washed before, without using gas and chemicals, lower cost and easy management, reverse wash of low intensity, and the effect is good, the filter material long-lived, durable, and but according to water quality requirements, the single or double level series use level.  

 

Relevant technical parameters:

 

Equipment chart

 

 

 1. Into the hole    2, water, water   3, put the trachea recoil    4, as a mirror    5, water, water filter recoil

 6,after  filter pressure gauge      7,before pressure gauge