Specifications

1. treatment capacity: 1-500m3/h
2. motor power: 0.75-15kw
3. MOQ: 1 set
4. material: stainless steel, carbon steel

fully automatic pulse water distributor for water distribution

Structure

The EBMC automatic high efficiency pulse water distributor research and developed by our company according to water acid hydrolysis pool state requirements and the characteristics of a variety of water distributor. It is mainly consists of cabinet, siphoning installation, outlet pipe etc, with the characteristics of continuous feed water, instant drainage, Pool acid hydrolysis to form a periodic pulse water, is an ideal energy-efficient, reliable operation of the water distribution system..

 

Working principle

Automatic high efficiency pulse water distributor is discharged into the pool after the rapid flow of water in the siphon will be in charge of Road in the air away, to form a certain degree of vacuum within the main channel into the main channel, the role of the pipe inside and outside atmospheric pressure of water in the container. Water fast, cloth hydro completed in a short period of time, the pulse effect, stir up the bottom of the sludge waste water and the pool constantly mixing organic micro-organisms and wastewater has been a full contact reactions. EBMC efficient pulse water distribution, including both Bell and the inverted U-shaped tube.

 

Usage

The equipment is mainly used for all sewage treatment works with hydrolysis acidification to improve the efficiency of hydrolytic acidification. While for the needs of pulses for the fluid.

 

Characteristics

1. Simple structure, does not require complicated equipment, water distribution process of the entire inspiratory rely on hydraulic auto-complete, convenient maintenance and management;

2. Low energy consumption, high efficiency, no other driving force in addition to enhance the inflow.

3. Uniform water distribution, hydraulic mixing effect

4. Long service life.

5. Automatic high efficiency pulse water distribution combined with the water distribution at the bottom of the pool acid hydrolysis, to ensure that the sludge concentration and slurry mixing effect, control of flammable, malodorous gases, so that better treatment effect, shortening the residence time, reducing the pool capacity, reducing the investment cost.

 

Ordering information

1. Customers need to provide relevant information
2. According to the water distribution capacity, to determine the product structure and material
3. To provide users with optimal product design4. We provide users with the installation diagram EBMC-Q-Qj/Qb