Specifications

Mechanical sand filter water system
1.5 KGF/cm2 work pressure
2.4degree quartile inlet water temperature

Mechanical filter for wastewater treatment

Product overview:
This product is suitable for requirements after filtering effluent turbidity generally in 5 mg/l can meet within the drinking water quality standard of industrial water or life in the water industrial and mining enterprises and town water treatment equipment. Industrial sewage to the suspended solid content, etc have very good remove effect. The water is the suspended condensed flakes with precipitation method can remove the adhesive of the colloid particles, water pressure, put in the filter through the filter bed, make water to transparent.
The product of two water situation choice:
Single filter material for YuJinShui filter turbidity often in 100 mg/l or so, without the coagulation precipitate raw water (such as often use turbidity higher raw water, attention shall be paid to the operation cycle shorten or filter speed reduce), the filter when use should be in the front note and coagulants.
Double filter material filter YuJinShui turbidity is in commonly 15 milligram/litre the following, the highest not more than 20 mg/liters of water of the precipitation.

Main technique conditions:
5 KGF/cm2 work pressure
4 °C quartile inlet water temperature
The running speed of the 10 m/min
Turbidity: fill < 20 mg/L water < 5 mg/L
Phi 2400 above need to match the compressed air, when something to help blunt.
Mechanical filter, iron, manganese removal filter except according to user requirements with many road valves.