Salt Spray Environmental Test Chamber For Sale adapted to the surface treatment of various materials, including paint, electroplating, organic and inorganic coating, after these anti-corrosive treatment to test the corrosion resistance of their products.
Structure
1. The Salt Spray Chamber cover is made of transparent materials so that the operator can see the tested sample in the chamber and the spraying situation of the tested sample.
2. A waterproof structure is adopted between the chamber cover and chamber body and thus there is no salt spray overflow.
3. Adopts the tower spraying system and equipped with the salt solution filter system and non-crystal nozzle so as to realize even salt spray distribution and freely adjustable settlement.
Maintenance Procedure:
1. Ensure the test quality, please replace the glass nozzle periodically within 4500 hours.
2. Clean the inner of the chamber and release the water in heat sink if a longer time interval from the next test.Release the water from heat sink:open the drain value.Release the water from isolation tank:pulled up the middle silicone plug.Release the water from preheat tank:Pull out the internal silicone plug.
3. Don’t use the salt solution if unused for a week, avoid affecting the test quality.
4. Change the heat sink water if the test period over one month.
