Product Details

Hight quality and best price modified atmosphere packaging machine

Sturcture principle

1.The machine is mainly composed of frame,film submitting part,box sending part,

food conveying belt,position locating belt,vacuum box,packing box sending up and down,air-fresh-keep filling and distributing system,pneumatic operating system,heated film’s

temperature keeping system,automatic electricity and gas controlling system

(Refer to the structure showing picture

2.The machine will put the packing box filled with food on the food put-in belt(Refer to the structure showing picture about film’s installation way).When

the machine is operating,box sending part will put the box into the mould,then the film submitting part will transmit the film on the box.After the air in the mould is

extracted and the air-fresh-keeping air is filled in,the heated film will be sealed on the box(Seal the film on

the packing box).Cut the film.The already-packed packing box will be transported to the food output belt.Thus,a full packing

circulation process is finished.

3.The machine automatic control system contain the international leading Japanese omron programmable controller(PLC)and touch screen,programmable man-machine interface and servo control and relevant elevant electrical components.Gas mixing,displacement,shear,heat sealing film,release heat sealing material mold

conversion operation procedures are controlled by the microcomputer automatic.

Friendly man-machine interface,packaging process each link can be set on the touch screen

according to need.

Technical parameters:

Overall dimension(mm)	6200(L)1100(W)2400(H)
Working power	220V/2.3KW
Working pressure	0.6-0.8Mpa
Working efficiency	800NL/min
Gas replacement rate	≥98%(can adjust)
Fresh gas purity	≥99.5%(food grade CO2,O2,N2)
Packaging specification	one mould two pieces/three pieces/four pieces
Packaging speed	modified atmosphere400-800pieces/HR,ordinary600-1000pieces /HR
Weight	1500kg