Handheld Oscilloscope, buy DSO8102E,100MHz Bandwidth Handheld Hantek Oscilloscope on China Suppliers Mobile

Product Details

DSO8102E,100MHz Bandwidth Handheld Hantek Oscilloscope

Function & Benefits

5.6 inch TFT LCD display
2 Channel with 2M record length
100MHz bandwidth with 1GS/s real time sampling rate
Build-in 25MHz Signal Generator
Six in one: Oscilloscope/Recorder/6000 dots DMM/Signal generator/FFT Spectrum Analyzer/Frequency Counter
Waveform data can be output in WORD,EXCEL, BMP, JPG
Interface:USB_Host,USB_Device,WIFI/LAN(Optional)

Specifications

Model	DSO8072E	DSO8102E	DSO8152E	DSO8202E
Sample Modes	Real-Time Sample
Normal	Normal data only
Peak Detect	High-frequency and randon glith capture
Average	Wavefom Average, selectable 4,8,16,32,64,128
Inputs Coupling	AC, DC, GND
Inputs Impendance	1MΩ±2% , 20pF±3pF
Probe Attenuation	1X, 10X
Supported Probe Attenuation Factor	1X, 10X, 100X, 1000X
Maximum Input Voltage	CAT I and CAT II: 300VRMS (10×), Installation Category; CAT III: 150VRMS (1×)
Horizontal System
Sample Rate Range	1GS/s
Waveform Interpolation	(sin x)/x
Record Length	2M
SEC/DIV Range	4ns/div~2000s/div, in a 2, 4, 8 sequence		2ns/div~2000s/div, in a 2, 4, 8 sequence
Sample Rate and Delay Time Accuracy	±50ppm over any ≥1ms time interval
Vertical System
Bandwidth	70MHz	100MHz	150MHz	200MHz
Rise Time at BNC( typical)	5ns	3.5ns	2.3ns	1.8ns
Vertical Resolution	8-bit resolution, all channel sampled simultaneously
Volts Range	2mV/div to 100V/div at input BNC
Math	+, -, *, /, FFT
FFT	Windows:Hanning, Flatop, Rectamgular, Bartlett, Blackman; 1024 sample point
Bandwidth Limit	20MHz
Low Frequency Response (-3db)	≤10Hz at BNC
Trigger System
Trigger Types	Edge, Video, Pulse, Slope, Over time, Alternative
Trigger Source	CH1, CH2, AC Line
Trigger Modes	Auto, Normal, Single
Coupling Type	DC, AC, HF Reject, LF Reject, Noise Reject
Trigger Sensitivity	DC(CH1,CH2): AC; HF Reject; LF Reject
Trigger Level Range	CH1/CH2: ±8 divisions from center of screen;
Trigger Frequency Counter
Readout Resolution	6 digits
Accuracy (typical)	±30ppm (including all frequency reference errors and ±1 count errors)
Frequency Range	AC coupled, from 4Hz minimum to rated bandwidth
Multimeter Specification
Maximum Resolution	6000 Counts
DMM Testing Modes	Voltage, Current, Resistance, Capacitance, Diode & Continuity
Maximum Input Voltage	AC: 600V DC: 800V
Maximum Input Current	AC: 10A DC: 10A
Input Impedance	10MΩ
Capacitance	40nF~400μF
Diode	0V~2.0V
On-off Test	< 10Ω
Waveform Generator Mode
Frenquency Range	1Hz(DC)~25MHz
DAC Clock	2K~200MHz adjustable
Memory Depth	4KSa
Vertical Resolution	12 Bits
Stability	<30ppm
Amplitude	±3.5V Max.
Output Impedance	50 Ω
Output Current	50mA Ipeak=50mA
System Bandwidth	25M
Harmonic Wave Distortion	-50dBc(1KHz), -40dBc(10KHz)
General Specifications
Display Resolution	640 horizontal by 480 vertical pixels
Display Contrast	Adjustable (16 gears) with the progress bar
Frequency(typical)	1kHz
Dimension	260mm220mm 75mm
Weight	2.5KG(without Packing)