Specifications

ISO certificated
Meet ASTM D 1000,EN 12068,AWWA C 214,IPS standards
Long life service
Best Piping coating wrapping materials

 

polyethylene coating wrapping for effluent pipeline

 

a) Laminated polyethylene (low-density), backed self-adhesive, rubberized, bitumastic compound tape. 

1) Polyethylene inner wrap: 

Thickness should be minimum 0.305 mm (0.012"), with self-adhesive compound thickness 0.203 mm 

(0.008") minimum. Interleaf in rolls supplied shall be double sided release coated paper or polymer 

preferably with extra width for roll protection. 

 

Characteristics of tape: 

- Elongation : 250% 

- Tensile strength : 7 N/mm2 

- Tear resistance : 8 kg/cm 

- Dielectric strength : 40 Kvolt/mm 

- Insulation strength : 1 x 106 Ohm/mm 

- Impact resistance : 3.2 Joules 

- Adhesion to steel (With primer) : 2.6 N/mm 

- Adhesion to self : 0.5 N/mm 

- Temperature range : -5~ C to 90~ C 

  The polyethylene coating wrapping for effluent pipeline.

 

  Serves for
Oil, Gas and Water Transmission pipeline market
Oil and Gas distribution and utility markets
New pipeline construction markets
Rehabilitation and Reconditioning market
Offshore Industry
Refinery and Petrochemical Plant Industry
Manufacture of Polyethylene coatings utilizing Butyl based elastomeric adhesives,
Polyethylene films and liquid adhesives for corrosion protection of steel pipe.
Provides corrosion protection with the inherent chemistry of Polyethylene and Butyl
Adhesive for resistance to water and oxygen penetration. Oxygen and Water are prevented
 from reaching the metal substrate, which are necessary and sufficient conditions for corrosion.
Manufacture of conventional and specialty Polyethylene, Polypropylene and Polymeric Alloys and
coating systems for pipe corrosion protection.
Manufactures PE coatings systems for applications for New Pipe Construction and
Rehabilitation and Reconditioning
Approved to ISO 9001 and to other good manufacturing and technical standards and norms
governed within the energy and pipeline industry.
Coating systems that have a broad range of temperature and shear resistance properties
to meet the requirements of the pipeline and end-user.