Polyethylene ANTICORROSIVE TAPE including Inner Wrap, Outer Wrap, Joint Wrap, Primer, Double Sided Adhesive tape,
these products are using inorder to corrosion protection for Oil, Gas, Petrochemical, Water and Waste Water underground Steel pipelines.

The  polyethylene anticorrosive tape as consists of two parts:
1. Adhesive: Inner layer of Butyl rubber.

2. Backing: Outer layer of Polyethylene(PE) Plastic.

Specification of polyethylene anticorrosive tape:

Inner wrap tape:

T-140 (0.38mm), T-150 (0.51mm), T-165 (0.64mm), T-180 (0.76mm), T-1100 (1.02mm), T-1130 (1.27mm);

Outer wrap tape:

T-240 (0.38mm), T-250 (0.51mm), T-265 (0.64mm), T-280 (0.76mm), T-2100 (1.02mm), T-2130 (1.27mm);

Joint wrap tape:

T-365 (0.64mm), T-380 (0.76mm), T-3100 (1.02mm), T-3130 (1.27mm);

Thickness:0.38mm-1.3mm, Width:50mm, 75mm, 100mm, 150mm, 230mm, 300mm

Lengh: 30-300m

Synthetic Primer:

P19: Solid content 19%;

P27: Solid content 27%.

Mastic filler::

N99: Solid content 99

Prepare surfaces by removing all loose scale, rust or other foreign matter by grit blasting or wire brush. Surface must be clean, dry and free of grease. and then wrap the inner wrap tape by overlap 50% at least and then wrap the outer tape by same method.please visit our website