Product Details

Programmable LCD touch screen Control Thermal Shock Test Chamber for Electronics Testing

Thermal shock testing reveals an element or sample's behavior while undergoing rapid changes in temperature. Thermal shock chambers are often used for testing the resilience of microelectronic devices in the face of sudden temperature shifts. These thermal stress-testing chambers typically have two compartments for hot and cold, though some models offer and intermediate third chamber for ambient/room temperature. A thermal shock chamber will typically have a temperature between -80C and 200C. Thermal shock chambers can affect temperature changes of up to +/- 70C per minute. These high-throughput thermal shock testers often share attributes of other environmental test chambers, including humidity and vibration functionality.

3 Zone Thermal Shock Test Chamber
Specifications		Note:1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available
Model		KTS-D Series
		300D
Interior size	W(mm)	800
	H(mm)	600
	D(mm)	650
Exterior size	W(mm)	1850
	H(mm)	2000
	D(mm)	1980
Test weight(KG)		20
Low Temp. chamber		-80ºC~-10ºC
Pre-heat time		+20ºC~-80ºC ,Within 60 mins
Test. chamber		-65ºC~+150ºC
High Temp. chamber		+60ºC~+200ºC
Pre-heat time		+60ºC~+200ºC ,Within 20 min
Recovery time		High-Temp Exposure 30 min
		Low-Temp Exposure 30 min
		Recovery time within 5 min
Safety device		No fuse breaker, over pressureover heat and over current protection for compressor,over temperature protection, over load protection for blower, dry heat protection
Standard accessory		Cable port(portΦ50mm)1, shelves2
Interior material		Stainless steel plate(SUS 304)
Exterior material		Baked painting steel or stainless steel(SUS304)
Insulation material		Rigid polyurethane Foam+glass fiber wool
Refrigeration system		Water Cooled
		Semi-hermetic compressor, cascade refrigeration system, CFC free refrigerant(HFC-507 and HFC-23)
Controller		Panel:7-inch LCD Touch panel,Chinese or English display selectable
		Operation model:Program or fix point running
		Memory capacity:120programs,1200steps,all repeat 999cycles,part repeat 99 cycles.
		Accuracy:Temp.:0.1% of F.S±1 digit Humidity:0.1% of F.S±1 digit
		Input:Temp.:pt-100 Humidity:pt-100 or ~5V DCV
Ambient Temp.		+5ºC~+35ºC
Power		AC 380±10%50Hz ,3 phase 4 wires +Ground Wires

1. Housing: integrated structure, mono-block construction which comprises all systems necessary for operation. And the outer housing is made of good quality galvanized sheet steel which is inside and outside primered and painted to a standard finish with high quality materials. The exterior surface will have high wear resistance.

2. Test space: the internal test space will be made of non magnetic SUS-304 stainless steel with no paint. All the seams will be TIG welded and vapor tight. The surface has no light reflection.

3. Insulation: the insulation material will be of low 'k' factor, high intensity and non hygroscopic nature. The insulation will be multi layered with double vapor barrier. Asbestos free mineral fiber insulation will be used.

4. Door: fully-opened and single wing type, double silicone sealed, hinges and locks; the cold zone and hot zone each has a door; the test sample zone has a fully-opened single wing door.

5. One Emergency Stop outside the chamber.

6. Cable port: One dia. 50mm or dia.100mm porthole.

7. Power board and machine group positioning: in a frame placed behind the chamber.

Machine Parts

Name: Bock Compressor

Brand: Bock

Original: Germany

Compressor rack, high efficiency low energy consumption, low noise;

Electronic components

Name: Electric cabinet
Brand: Schneider, DANFOSS, Omron, Panasonic
Original: Germany, France, Japan
Top brand electronics, with full range of protection include overheat of blower fan motor, earth leakage protection, load short circuit protection, over temperature protection, over pressure protection and so on.

Pre-Sales Service

* Inquiry and consulting support.

* Sample testing support.

* Visiting our factory is highly welcomed.

After-Sales Service

* If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.

Packing
Packing Details	The normal package is wooden box(Size: LWH). If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special requirments.