Stainless Steel High Low Temperature Thermal Shock Test Chamber Solar Module Test
USD $15,000 - $50,000 /Set
Min.Order:1 Set
Guangdong KOMEG Technology Ind Co., Limited
Battery Safety Test Equipment High Low Temperature Thermal Shock Test Chamber Solar Module Test
Three box of cold and hot High Low Temperature Thermal Shock Test Chamber Solar Module Tester
2 zones basket hanging type High Low Temperature Thermal Shock Test Chamber Solar Module Tester
Forced Air Circulating High Low Temperature Thermal Shock Test Chamber Solar Module Tester
two/three-zone High Low Temperature Thermal Shock Test Chamber Solar Module Tester
Simulation environmental 3 zone cold & hot shock chamber for LED light ageing test
Stainless Steel High Low Temperature Thermal Shock Test Chamber Solar Module Test
1. Thermal Shock Test Chamber :
Thermal shock test chamber is requisite testing equipment in metal, plastic, rubber, electronics and other industries. It is used for testing the material structure or composite material’s tolerance degree when exposed instantly in extremely high temperature and extremely low temperature environment continuously, so that whose chemical or physical damage due to thermal expansion and contraction can be detected in shortest time.
2. 3-Zone Thermal Shock Chambers Working Principle:
The three-zone type thermal shock test chamber. Sample is placed in the test chamber, more extreme temperature than test temperature can be set in high-temperature chamber and low-temperature chamber. During low temperature test, cold chamber door open, and low-temperature chamber working together with test chamber. When converted into high-temperature test, cold chamber door closed, hot chamber door are opened, and test chamber working together with high-temperature chamber.
Conversion of mechanical action (transferring from high temperature to low temperature or low temperature to high temperature) can be completed in less than 1 second, and the temperature can be quickly stabilized.
During the whole test, test sample is no need to be moved, and without any human intervention.
Model | TST-A Series | |||||
70A | 130A | 226A | 360A | 500A | ||
Test weight(KG) | 5 | 5 | 5 | 5 | 10 | |
Interior size | W(mm) | 410 | 520 | 610 | 710 | 810 |
H(mm) | 560 | 670 | 770 | 830 | 710 | |
D(mm) | 410 | 520 | 610 | 770 | 860 | |
Basket size | W(mm) | 300 | 410 | 510 | 610 | 710 |
H(mm) | 300 | 410 | 510 | 730 | 610 | |
D(mm) | 300 | 410 | 510 | 510 | 730 | |
Low Temp. chamber | -55ºC~-10ºC | |||||
Pre-cooling time | +20ºC~-55ºC, Within 60 min | |||||
Test. chamber | -40ºC~+150ºC | |||||
High Temp. chamber | +60ºC~+200ºC | |||||
Pre-heating time | +60ºC~+200ºC ,Within 25 min | |||||
Recovery time | High-Temp Exposure 30 min | |||||
Low-Temp Exposure 30 min | ||||||
Recovery time within 3 min | ||||||
Safety device | NFB(No fuse breaker), over pressure, over heat and over current protection for compressor, over temperature protection, over load protection for blower, dry heat protection | |||||
Standard accessory | Cable port(portΦ50mm)*1, shelves*2 | |||||
Interior material | Stainless steel plate(SUS 304) | |||||
Exterior material | Baked painting steel or stainless steel(SUS304) | |||||
Insulation material | Rigid polyurethane Foam + glass fiber wool | |||||
Refrigeration system | Water Cooled | |||||
Semi-hermetic compressor, cascade refrigeration system, CFC free refrigerant(HFC-507 and HFC-23) | ||||||
Controller | Panel:7-inch LCD Touch panel, Chinese or English display selectable | |||||
Operation model: Program or fix point running | ||||||
Memory capacity:120programs,1200steps, all repeat 999cycles,part repeat 99 cycles. | ||||||
Accuracy: Temp.:0.1% of F.S±1 digit Humidity:0.1% of F.S±1 digit | ||||||
Input:Temp.:pt-100 Humidity:pt-100 or ~5V DCV | ||||||
Ambient Temp. | +5ºC~+35ºC | |||||
Power | AC 380±10% 50Hz ,3 phase 4 wires +Ground Wires | |||||
Note:1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available |
1) Delicate touch and excellent user experience
2) Unique and compact design, top grade appearance, stable performance and easy operation.
3)Can simulate a wide range of temperature and humidity environments
4)Capable of testing large components, assemblies, and finished products
5)Customized sizes and configurations available
Vertical Orientation- two-zone chamber has hot and cold zones that can be controlled independently. A single basket product carrier moves between the hot and cold zones, subjecting the product to dramatic changes in temperature.
* Inquiry and consulting support.
* Sample testing support.
* Visiting our factory is highly welcomed.
* We will train you how to install, use and maintain the machine.