Name: Environmental Testing Equipment / Enviromental Chamber For Shock Testing
Brand: KOMEG
Availability: InStock

Product Details

Environmental Testing Equipment / Enviromental Chamber For Shock Testing

KOMEG thermal shock chambers meet the demands of today's environmental stress screening with proven performance in installations around the world. Our direct transfer method between hot and cold is an economical method to achieve rapid part temperature change for ESS or thermal shock.

Thermal shock test chamber is requisite testing equipment in metal, plastic, rubber, electronics and other industries. It is used for testing the material structure or composite material’s tolerance degree when exposed instantly in extremely high temperature and extremely low temperature environment continuously, so that whose chemical or physical damage due to thermal expansion and contraction can be detected in shortest time.

1. Introduction of thermal shock chamber:

Thermal Shock Testing Chamber is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment , that is in the shortest time to test its thermal expansion and contraction caused by chemical change or physical harm. Application objects, including metal, plastic, rubber, electronics ... and other materials can be used as a basis to improve their products or reference.

1.2 Corresponding standard:

1 GB/T2423.1-1989 low-temperature testing method
2 GB/T2423.2-1989 high-temperature testing method
3 GB/T2423.22-1989 change temperature test
4 GJB150.5-86 temperature impact test
5 GJB360.7-87 temperature impact test
6 GJB367.2-87 405 temperature impact test

1.3 KOMEG offers several configurations of thermal shock chambers capable of meeting a wide variety of testing needs.
Vertical, two zone chamber has hot and cold zones that can be controlled independently.
Horizontal, three zone thermal shock chamber utilizes controlled areas for hot, ambient and cold temperatures.
Double duty thermal shock chambers from KOMEG are designed with hot zones above and below the cold zone and a two compartment product carrier that simultaneously moves products between the hot and cold zones.

Specifications		Note:1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available
Model		KTS-A Series							KTS-B Series							KTS-D Series
Model		72A	100A	150A	200A	252A	300A	480A	72B	100B	150B	200B	252B	300B	480B	72D	100D	150D	200D	252D	300D
Interior size	W(mm)	450	500	600	670	700	800	800	450	500	600	670	700	800	800	450	500	600	670	700	800
	H(mm)	400	450	500	600	600	600	800	400	450	500	600	600	600	800	400	450	500	600	600	600
	D(mm)	400	450	500	500	600	650	750	400	450	500	500	600	650	750	400	450	500	500	600	650
Exterior size	W(mm)	1490	1540	1640	1720	1750	1850	1850	1490	1540	1640	1720	1750	1850	1850	1490	1540	1640	1720	1750	1850
	H(mm)	1790	1840	1890	2000	2000	2000	2200	1790	1840	1890	2000	2000	2000	2200	1790	1840	1890	2000	2000	2000
	D(mm)	1600	1700	1830	1850	1930	1980	2500	1600	1700	1830	1850	1930	1980	2500	1600	1700	1830	1850	1930	1980
Test weight(KG)		5	10	12	15	18	20	20	5	10	12	15	18	20	20	5	10	12	15	18	20
Low Temp. chamber		-55ºC~-10ºC							-70ºC~-10ºC							-80ºC~-10ºC
Pre-heat time		+20ºC~-55ºC ,Within 60 min							+20ºC~-70ºC ,Within 60 min							+20ºC~-80ºC ,Within 60 mins
Test. chamber		-40ºC~+150ºC							-55ºC~+150ºC							-65ºC~+150ºC
High Temp. chamber		+60ºC~+200ºC
Pre-heat time		+60ºC~+200ºC ,Within 20 min
Recovery time		High-Temp Exposure 30 min
		Low-Temp Exposure 30 min
		Recovery time within 5 min
Safety device		No fuse breaker, over pressureover heat and over current protection for compressor, over temperature protection, over load protection for blower, dry heat protection
Standard accessory		Cable port(portΦ50mm)1, shelves2
Interior material		Stainless steel plate(SUS 304)
Exterior material		Baked painting steel or stainless steel(SUS304)
Insulation material		Rigid polyurethane Foam+glass fiber wool
Refrigeration system		Water Cooled
Refrigeration system		Semi-hermetic compressor, cascade refrigeration system, CFC free refrigerant(HFC-507 and HFC-23)
Controller		Panel:7-inch LCD Touch panel,Chinese or English display selectable
		Operation model:Program or fix point running
		Memory capacity:120programs,1200steps,all repeat 999cycles,part repeat 99 cycles.
		Accuracy:Temp.:0.1% of F.S±1 digit Humidity:0.1% of F.S±1 digit
		Input:Temp.:pt-100 Humidity:pt-100 or ~5V DCV
Ambient Temp.		+5ºC~+35ºC
Power		AC 380±10%50Hz ,3 phase 4 wires +Ground Wires

1.3-zone design: High temperature zone, cold temperature zone, and testing zone.
2. The test specimens under test are stationary in the testing zone.
3. Touch-control operation interface for ease of use.
4. Max. 999H and max. 9999 cycles for high or low temperature shock for thermal shock test chamber.
5. Automatic cycling shock or/and manual selective shock are available
6. Water cooled, binary cooling system for quick cooling effect.

2.1 Refrigeration system characteristics
1. Import compressor, reduce the operating noisy, better performance;
2.The unit module standardization. Set up the bend language manual, ensure that make unity. Cooling line adopts advanced bend language process, ensure refrigeration accurate, uniform;
3.The operation of refrigeration system adopt intelligent control, power consumption is small, all refrigeration parts adopt international famous brand, quality assured for long-term stable operation.
4.Modular making, ease to install, repair and maintenance; Air-cooled condenser of refrigeration unit add the filter net, ensue the normal operation;
5.Intelligent cooling capacity adjustment, good control effect. Wide range of load.

2.2 Structure Features

Wall material:Top-grade Carbon Steel Plate,Surface electrostatic color Spray processing

Inner wall material:Stainless Steel Plate SUS304

Body insulation material:Rigid polyurethane Foam + glass fiber

Door insulation material:Rigid Polyurethane Foam + Glass fiber

2.3 Material:

Interior material: Stainless Steel Plate SUS304#

Exterior material: Baked Painting Steel Plate or Stainless Steel SUS304#

Insulation material: Rigid polyurethane Foam and Glass Fiber Wool

Climatic thermal shock test chamber are covered with air bubble film before put them into the strong plywoodcase, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, crash-proof, etc.

After-Sales Service

* If you face any problems in future during testing process, we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video, English operation muanual and video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.