Specifications

liquid thread sealant
1.blue liquid
2.thixotropic, moderate strength
3.seal for M6 to M20 screws
4.50ml/250ml

                  kafuter K-0242 M20 Blue Liquid Thread Sealant

Technical Properties:

Testing Item:	K-0242 Thread Locker Adhesive
Main ingredient:	epoxy resin methacrylic
Appearance:	blue liquid
specific gravity:	1.05g/m3
Viscosity:	thixotropic, in 1000~2000mPas
Flash Point:	>108°c
Prevail Torque:	7 N.m
Break torque:	12 N.m
Working temperature:	-54~+149°C
Room Cure time(at 25°c):	15 minutes(initial cure time) 24 hours (full cure time)
Max filling:	0.13mm

 

Main Characteristics:

One-part, thixotropy, moderate intensity, and good media resistance anaerobic metal thread locker sealant. With high locking strength which make it not easy to disassembly.

 

Typical Applications:

Seal and lock for M6-M20 metal thread fasteners to prevent its loosening and rusting. Especially apply in car&motorcycles maintenances.

 

Packing Specifications:

(1) 50ml/bottle, 10bottle/box , 80bottle/carton

(2) 250ml/bottle, 10bottle/box,  40bottle/carton

 

User's Guide:
a) Remove the oil and grease from the surfaces to keep it dry and clean

b) the threads should be coated enough glue until filling the whole gap. the best coating ways is coating the threads with a thin film with 0.05mm

c) Tighten the thread and wipe off the excess adhesive
d) It can get initial cure for 15 minutes, and reach full cure in 24h. 

 

Note: 

(1)Keep away from the children.

(2)This product may produce some irritating odor during working time. if contact with your eyes or skin, pls flush with water, if serious, you should go to hospital.

(3)The storage life is 12 months, it should be store in dry and shade place under the temperature of 15°c to 28°c