Specifications

tile joint sealant
liquid
2.thixotropic, high strength
3.seal and lock below M20 thread fasteners
4.50ml/bottle

                    Kafuter K-0262 red acrylic joint sealant 

                       (for Below M20 Thread Fasteners)

 

 

 

 

 

 

Technical Properties:

Testing Item:	K-0262 Thread Locker Adhesive
Main ingredient:	epoxy resin methacrylic
Appearance:	red liquid
specific gravity:	1.05g/m3
Viscosity:	thixotropic, in 1000~2000mPas
Flash Point:	>108°c
Prevail Torque:	15 N.m
Break torque:	20 N.m
Working temperature:	-54~+149°C
Room Cure time(at 25°c):	15 minutes(initial cure time) 24 hours (full cure time)
Max filling:	0.13mm

 

Main Characteristics:

One-part, thixotropy, high intensity, and good media resistance anaerobic metal thread locker sealant. With high locking strength which make it not easy to disassembly.

 

Typical Applications:

Seal and lock for M6-M20 metal thread fasteners to prevent its loosening and rusting. Especially apply in car&motorcycles maintenances.

 

 

 

 

 

(2) 50ml/bottle, 10bottle/box , 80bottle/carton 

(3)250ml/bottle, 10bottle/box, 40bottle/carton

 

 

User's Guide:
a) Remove the oil and grease from the surfaces to keep it dry and clean

b) the threads should be coated enough glue until filling the whole gap. the best ways is coating the threads with a thin film with 0.05mm

c) Tighten the thread and wipe off the excess adhesive
d) After 15 minutes cure, it can get initial cure, and after 24 hours, can get full bonding strength. 

 

Note: 

(1)Keep away from the children.

(2)This product may produce some irritating odor during working time. if contact with your eyes or skin, pls flush with water, if serious, you should go to hospital.

(3)The storage life is 12 months, it should be store in dry and shade place under the temperature of 15°c to 28°c