Specifications

Eco-friendly Thickener(618)  

1)General Description 

Eco-friendly thickener 688 is of high performance, applied to coating pigment printing. It can be mixed with different kinds of binder. 688 is acceptable in roller printing, flat screen printing or rotary screen printing. It endows printing fabrics with sharp definition and good color yield, which overpasses imported homogeneous products in coloration and brilliance. It is easy to make printing paste with only 2% dosage of 688thickener.

 2) Technique Data

1. Composition: Acrylate polymer

2. Properties

Appearance                 Solid content           Dosage            Viscosity           

white viscous liquid         About 40%           2%              100,000 mpas         

Viscosity of potential resistance to electrolyte contamination  40,000 centipoises;

3)Usage   

      Water     Emulsion     688           Coating pigment             Total

70%-80%     0%-20%       2%                X%                            100%

4) Safety Notes

Product shall be stored in places under cool, dry and ventilated condition.

5)characteristic

1. Strong water cohesive and thickening capability under high-speed stirring.
2. High consistency with printing binder, pigment pastes and other textile printing auxiliaries.
3. If pigment doesn’t reach enough consistency, then thickener can be added, which won’t have ill impact on printing result.
4. High thickening capability. 2.3% in flat screen printing and less than 2.5% in rotary screen printing.
5. High quality stabilization. Free from dilution or bad smell.
6. Good color yield, sharp definition and soft hand feeling.
7. Bring thickening effect to printing paste, and the prepared paste can mix with all kinds of oil-covering water-based paste.
8. Applicable also in bringing better thickening effect to rubber paste, transparent paste, color-printing paste, if consistency is not high enough.

6)Usage

1. On preparing printing paste, add appropriate dosage of EM618 to measured water and stir at high speed until reaching required consistency.

2. In case printing paste is not viscous enough, then add some EM618 when stirring.

7) Safety Notes 

1. Thickening ability in soft water is better than that in hard water.

2. Don’t mix with cationic auxiliaries.

3. One year of guarantee under storage temperature 0-40°C.

4. Please use cloth or soft paper to clean when getting blotched by thickener, and wash with salt electrolyte and water.

Notes: Above usages have been proved through practice. But considering practical printing techniques, please choose the right manufacturing process after experiment.

Foshan YIMEI Chemicals Co., Ltd

Yimei has more than decades of manufacturing experience. our manufactory  local in foshan sanshui with hundreds area, more than 100 team workers.

Our hot products are as follows:

1.     pigment paste for pigment printing

2.     Thickener for pigment printing or dyes printing

3.     Pigment binder

4.     Emulsion softener