Reactive Thickener chemical for textile printing(YIMEI )
Negotiable /Kilogram
Min.Order:1000 Kilograms
Foshan Yimei Chemicals Co., Ltd.
acrylic thickener for textile prinitng ,binder,pigemnt paste(YIMEI)
(YIMEI) acrylic polymer thickener for textile printing mix binder,soft agent,pigment paste
(YIMEI) acrylic polymer thickener for textile printing mix binder,soft agent,pigment paste
Dispersion Printing Paste for polyester fibre resist or discharge printing
Acidic Printing Paste for polyamide fibre, real silk and other textile(EM-228)
Synthetic thickener for pigment printing
(YIMEI more than decades of manufacturing experience)
Composition: Acrylate polymer
Appearance: white or yellowish viscous emulsion
Ionic type Anionic; No hazard
PH range: 6.5-7.5(1%white paste)
Solubility: Mix with water at any rate
less dosage
Net Weight of each barrel: 50Kg or 125Kg
Features of thickener:
1. Eco friendly thickener for aqueous printing
2. Strong water cohesive and thickening ability
3. High concentration, small dosage, no influence to handle, good color yield, sharp definition.
4. To enhance colour depth in loop ager for disperse prints.
5. Tested by independent testing centers (SGS) in China.
6. Available to be used in cotton cloth, T/C cloth, nylon, special fibers and pass 110-120 degrees of heat treatment after finishing printing.
thickener type
Model | Technical Data | Property and Features |
EM-618-1 | 1)Appearance yellowish viscous liquid Solid content 36±2% 2)Dosage: 3% 3)PH value 6~7 4)Viscosity 45.000~60.000 mpas | Thickener for Coating Printing 1)High thickening capability. 3% in flat screen printing and less than 2.5% in rotary screen printing. 2)High quality stabilization. Free from dilution or bad smell. 3)Good color yield, sharp definition and soft hand feeling. 4) excellence practise effect |
EM-618-2 | 1)Appearance yellowish viscous liquid 2)Solid content 36±2% 3)Dosage: 2.3~2.7% 4)PH value 6~7 5)Viscosity 55.000~70.000 mpas | Thickener for Coating Printing 1)High thickening capability. 3% in flat screen printing and less than 2.5% in rotary screen printing. 2)High quality stabilization. Free from dilution or bad smell. 3)Good color yield, sharp definition and soft hand feeling 4) practise effect better than EM-618-1
|
EM-618-A | 1)Appearance yellowish viscous liquid 2)Solid content 36±2% 3)Dosage: 2.0~2.3% 4)PH value 6~7 5)Viscosity 65,000~80,000 mpas |
Thickener for Coating Printing 1)High thickening capability. 3% in flat screen printing and less than 2.5% in rotary screen printing. 2)High quality stabilization. Free from dilution or bad smell. 3)Good color yield, sharp definition and soft hand feeling. |