Product Details

Product Description

Welcome to use ES-P13B Infrared motion sensor!

The product is a new saving-energy switch; it adopts good sensitivity detector, integrated circuit. SMT. It gathers automatism, convenience, safety, saving-energy and practicality functions. The wide detection field is consist of detectors. It works by receiving human motion infrared rays. When one enters the detection field, it can start the load at once and identify automatically day and night; Its installation is very convenient and Its using is very wide. It has functions of power indication and the detection indication.

SPECIFICATION:

MODEL	ES-P13B
DETECTION RANGE	12M(22-24°)
DETECTION ANGLE	360°
POWER SOURCE	110V-130V/AC 220-240V/AC
POWER FREQUENCY	50/60HZ
RATED LOAD	800W(110-130V/AC) 1200W(220-240V/AC)
TIME SETTING	5sec-7±2min
WORKING HUMIDITY	<93%RH
WORK TEMPERATURE	-10°C~+40°C
INSTALLING HEIGHT	1.5m-3.5m

FUNCTION:

Ø Can identify day and night: The consumer can adjust work ambient light. It can work in the daytime and at night when it is adjusted on the “sun” position (max). It can work in the ambient light less than 3LUX when it is adjusted on the “moon” position (min). As for the adjustment pattern, please refer to the testing pattern.
Ø SENS adjustable: It can be adjusted according to using location; low sensitivity with 2m for detection distance; high sensitivity with 12m, it fits for large room.
Ø Time-Delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the basic of the first time-delay rest.
Ø Time–Delay is adjustable. It can be set according to the consumer’s desire. The minimum time is 10sec±3sec. The maximum is 8min±2min.

INSTALLATIION (see the diagram)

Ø Switch off the power.
Ø Please move the upper cover with anti-clockwise whirl as per the diagram in the crust.
Ø Fix the bottom on the selected position with the inflated screw
Ø Connecting the power and the load to sensor as per the connection-wire sketch diagram.
Ø Buttoning the upper cover on the sensor, whirling the cover with clockwise when LED light bare, then you could switch on the power and test it.

CTION-WIER SKETCH DIAGRAM

(See the right figure)