Product Details

ES-P05 360 DEGREE LIGHT SENSOR SWITCH INFRARED MOTION SENSOR

Welcome to use ES-P05 Infrared motion sensor!

This product adopts high sensitivity detector, integrate circuit and SMT; It gathers automatic, convenient, safe, energy-saving, practical functions; It has wide detection range made up of up and down, left and right service field; It utilizes human motion infrared rays as control signal sources, when one enters the detection field, it will start the controlled load at once; It can identify day and night automatically; It is easy to install and its usage is wide; It has the function of power indication and detection indication.

SPECIFICATION:

MODEL	ES-P05
DETECTION RANGE	6M
DETECTION ANGLE	360°
POWER SOURCE	110V-130V/AC 220-240V/AC
POWER FREQUENCY	50/60HZ
RATED LOAD	800W(110-130V/AC) 1200W(220-240V/AC)
TIME SETTING	10±3Sec~7±2Min.
WORKING HUMIDITY	<93%RH
WORK TEMPERATURE	-10°C~+40°C
NET WEIDetection motion speed	0.6-1.5m/s

FUNCTION:

Ø Identify day and night automatically: The ambient light of P05 could be adjusted according to your desire: when turn to SUN (max), it will work day and night, when turn it to MOON (min), it will only work in the ambient light less than 3LUX. As for adjustment, please refer to testing way.
Ø Time-delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the rest of the first time-delay basis (set time).
Ø Time-delay is adjustable: It can be set according to your desire, the minimum is 10sec±3sec, and the maximum is 2min±30sec.
Ø It mainly be used fitting with ceiling lamp, but it also can be used alone.

INSTALLATION (see the diagram)

Ø Switch off the power.
Ø Fix the iron prop on the selected position with screw.
Ø Unscrew the plastic screw nut(If the sensor as an accessories)
Ø Connect two load with the connection-wire according to the sketch diagram.
Ø Connect power into green wiring terminal
Ø Fasten the plastic screw nut(if you have opened it), then electrifying and testing

CONNECT-WIRE FIGURE:

(See the right figure)