Product Details

Product Description

Certification:TUV/CE/ROHS/REACH/SAA/CB

Waterproof:IP20

Welcome to use ES-P19A Infrared motion sensor!

The product is a new savingenergy switch; it adopts good sensitivity detector, integrated circuit. It gathers automatism, convenience, safety, savingenergy and practicality functions. The wide detection field is consisting of detectors. It works by receiving human motion infrared rays. When one enters the detection field, it can start the load at once and identify automatically day and night; its installation is very convenient and its using is very wide. It has functions of power indication and the detection indication

Specification:

MODEL	ES-P19A
DETECTION RANGE	6M
DETECTION ANGLE	360°
POWER SOURCE	110V-130V/AC 220-240V/AC
POWER FREQUENCY	50/60HZ
RATED LOAD	800W(110-130V/AC) 1200W(220-240V/AC)
TIME SETTING	10±3Sec~7±2Min.(adjustable)
WORKING HUMIDITY	<93%RH
WORK TEMPERATURE	-10°C~+40°C
INSTALLING HEIGHT	1.5m-3.5m

FUNCTION:

Ø Can identify day and night: The consumer can adjust work ambient light. It can work in the daytime and at night when it is adjusted on the “sun” position (max). It can work in the ambient light less than 3LUX when it is adjusted on the “moon” position (min). As for the adjustment pattern, please refer to the testing pattern.
Ø Time-Delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the basic of the first time-delay rest.
Ø Time–Delay is adjustable. It can be set according to the consumer’s desire. The minimum time is 10sec±3sec. The maximum is 8min±2min.

INSTALLATION: (see the figure)

Ø Switch off the power.
Ø Turn clockwise the bottom-stand and take off it. The power wire cross the hole in the middle of bottom-stand
Ø The bottom-stand is fixed on the selected position with inflated screw.
Ø Connect the power and the load into the connection-wire column of the sensor according to connection-wire diagram.
Ø The sensor aimed at the mouth of bottom-stand and turned anti-clockwise.

(See the right figure) CONNECTION-WIRE DIAGRAM: