Product Details

Product Description

ES-P17B 360 degree infrared motion sensor with spring ceiling

Certification:CE/ROHS

Waterproof:IP20

1.PIR senor

2.Light and small

3.Auto switching on when detecting people coming

4.Super sensitivity within 6 meters distance

5.Wireless,easy to install,can be used in bedroom,washing room,back door,porch,front entrance,or outside of a barn/garge.

6.Extremely low energy consumption.

MODEL	ES-P17
DETECTION RANGE	6M
DETECTION ANGLE	360°
POWER SOURCE	110V-130V/AC 220-240V/AC
POWER FREQUENCY	50/60HZ
RATED LOAD	800W(110-130V/AC) 1200W(220-240V/AC)
TIME SETTING	10±3Sec~7±2Min.(adjustable)
WORKING HUMIDITY	<93%RH
WORK TEMPERATURE	-10°C~+40°C
INSTALLING HEIGHT	1.5m-3.5m
QUANTITY PER CARTON(PCS)	50

FUNCTION:

Ø Identify day and night automatically. Can adjust ambient light according to your desire: when turn to SUN (max), it will work in the daytime and at night. When turn to MOON (min), it will only work under less than 3LUX circumstance. As for Adjustment, please refer to testing way.
Ø Time-delay is added continually: when it receives the second induction signal after the first inductor, it will compute time once more on the rest of the first time-delay basic (Set time) .
Ø Time-delay adjustment: it can be set according to your desire. The minimum is 10±2 sec; the maximum is 8±2min.

INSTALLATION: (as following drawing.):

Ø Turn off the power.
Ø Moving the transparent vinyl cover what is in the bottom of the sensor.
Ø Loosing the screws in the connection terminal, connecting the power and rated load to connection terminal of sensor according to connection sketch map.
Ø Tighten the screws; put the transparent vinyl cover into the original station.

Folding the metal spring of the sensor to upwards, until they are in “I” position with sensor, then put the sensor into the hole or installation box what is in the ceiling, the size is similar

Ø with item. Releasing the spring, the sensor will be set in this installation position.
Ø After finishing installing, the sensor could be connected the power and testing it.

CONNECTION SKETCH FIGURE:

(As per right drawing)