Specifications

Sugar dryer
1.Energy-saving
2.prevents pollution
3.Adopts full closed structure
ISO9001-2008 SGS

Dry mortar rotary dryer

Can be applied in drying of raw materials such as yellow sand, slag, clay, quartz sand, and more

Widely used in industries such as dry mortar, cement, building materials, glass, chemicals, and casting

The rotary dryer is assembled by three concentric-cylinders which halved together with different diameters

Computer optimized stock guide and lifting blade with different angles and spacing are installed inside the cylinder, the structure can ensure that the material being dried runs along the direction of screw under the impact of gravitation, stay sufficient time and good dispersion in the cylinder to let the material exchange with the heat airflow from air heating furnace inside of the cylinder

The special three-cylinder structure makes the inner cylinder and middle cylinder being surrounded by the outer cylinder to form a self-contained thermal insulation system, the radiated heat from surface of inner and middle cylinder assist heat the material in the outer cylinder, but the outer cylinder is at the low temperature end, so the heat dissipation area and heat losses are reduced significantly.

Advantage:

Three-cylinder rotary dryer can take full advantage of excess heat, reduce heat loss and increase the heat exchange area, making the unit evaporation intensity of the rotary dryer greatly improved, thereby effectively improving the heat energy utilization rate, reducing the energy consumption and making the heat efficiency of three-cylinder rotary dryer improved in a wider range

Compared with single-cylinder rotary dryer with the same efficiency, its heat efficiency is improved about 50% and energy consumption saving doubles

Because the cylinder length of the three-cylinder rotary dryer is one third of single-cylinder rotary dryer and the base area saves about 60% than the single-cylinder rotary dryer, the base investment is reduced correspondingly

The rotary dryer drives by adopting the friction between supporting roller and belting leather 

 

 

 

 

Technical Specification of Dry mortar rotary dryer

Model	HG10	HG20	HG30	HG40	HG50	HG60
Theoretical production output(t/h)	10	20	30	40	50	60
Power(Kw)	2x5.5	2x7.5	4x5.5	4x7.5	2x5.5+2x7.5	2x7.5+2x11
Coal consumption(Each ton of dry sand/standard coal)(Kg)	10~15	10~15	10~15	10~15	10~15	10~15
Thermal efficiency	≥65%	≥65%	≥65%	≥65%	≥65%	≥65%

   

 Zhengzhou Taida Mining and Metallurgy Equipment Co., Ltd.