ISO9001 approved Rod mill
USD $9,999 - $99,999 /Set
Min.Order:1 Set
Zhengzhou Taida Mining And Metallurgy Equipment Co., Ltd.
Rod mill of ISO9001 approved
Energy-saving rod mill application:
Is generally used to grind material 1/4-inch and finer, down to the particle size of 20 to 75 microns
To achieve a reasonable efficiency with ball mills, they must be operated in a closed system, with oversize material continuously being recirculated back into the mill to be reduced
Various classifiers, such as screens, spiral classifiers, cyclones and air classifiers are used for classifying the discharge from ball mills
Ball mill is an efficient tool for grinding many materials into fine powder
The ball mill is used to grind many kinds of mine and other materials, or to select the mine
It is widely used in building material, chemical industry, and more
There are two ways of grinding: the dry process and the wet process
It can be divided into tabular type and flowing type according to different forms of discharging material
Energy saving rod mill, reduce the energy consumption by 30%
Improve fineness of discharging
Increase capacity by 15 to 20%
Energy-saving rod mill introduction:
Grinds material by rotating a cylinder with steel grinding balls, causing the balls to fall back into the cylinder and onto the material to be ground
The rotation is usually between 4 to 20 revolutions per minute, depending upon the diameter of the mill
The larger the diameter, the slower the rotation
If the peripheral speed of the mill is too great, it begins to act like a centrifuge and the balls do not fall back, but stay on the perimeter of the mill
The point where the mill becomes a centrifuge is called the (critical speed), and ball mills usually operate at 65% to 75% of the critical speed
Technical Parameter of Energy-Saving rod Mill:
Type | Feed Size | Discharging Size | Output (t/h) | Power of Motor (Kw) | Weight (t) |
HS-930 | 6-25 | 0-5 | 3-10 | 22 | 4.5 |
HS-1224 | 6-25 | 0-5 | 5-25 | 45 | 11.5 |
HS-1245 | 6-25 | 0-5 | 6-40 | 55 | 13.8 |
HS-1530 | 6-25 | 0-5 | 7-45 | 75 | 17 |
HS-1557 | 6-25 | 0-5 | 10-85 | 130 | 24.7 |
HS-1830 | 6-25 | 0-5 | 15-100 | 130 | 31 |
HS-1860 | 6-30 | 0-5 | 30-120 | 210 | 41 |
Rod mill,Intermittent Ball Mill,ball mills