Flash Solar Panel Tester For Solar Panel Manufacturing Plant
USD $9,000 - $80,000 /Set
Min.Order:1 Set
Jiangsu Keyland Laser Technology Co., Ltd.
Keyland Solar Panel tester GTM-5A For Solar Panel Manufacturing Machines
-----installation / commissioning / calibration / training------
Simplify your work with KeyLand's solar simulator !
Application
Keyland Solar Panel Tester is mainly used in electrical performance auto test and result record of solar Mono-Si, Poly-Si or a-Si cell module / panel ( Monocrystalline, polycrystalline, and amorphous silicon).
Solar Simulator's Main Technical characters:
A grade spectrum;
A grade unevenness degree of irradiance;
A grade instability degree of irradiance
A grade test error,
A grade repeat test error;
Pneumatic and buffering contact, front probe contact, back contact;
Four-line survy; 14-bit 4-channel high-speed synchronous acquisition, 8,000 data collecting dots;
10 parameters display; measurement parameter displays in tabulation and graphic way;
Irradiance automatically compensating; temperature automatically compensating
Voice counts off and prompts; counting promts of flash time;
24h continous working; working life of imported Xenon lamp is 300,000 times of flash.
Main Technical parameters
Type specifications | GTM-5A-2012 | GTM-B-2012 |
Lamp spectrum | In line with IEC60904-9 and JISC8933( Grade A) | |
Range of Light intensity | 100mW/cm2(continuous adjustable 70-120mW/cm2) | |
Light intensity non-uniformity | ±2%( A grade) | ±3% |
Instability degree of irradiation | ≤ ±2%(A grade) | ±2% |
Test results consistency | ±0.5% | ±1% |
Test error of electrical properties | ≤±1% | ≤±2% |
Single flash time | 10~40ms | 10ms |
Effective test range | 2000X1200mm/5w~330w or customer order | |
Power Supply | 220V ±10%, 5A/ 2KW/ 50-60Hz | |
Load time | 5 s | |
Light Pulse Duration | 10 ms | |
Data acquis. Speed per measurement | 20 µs | |
Reference Cell Range | 50 mV | |
Module measurements per hour | 700 | |
Measuring voltage | 0~100V (resolution 1mV) | |
Measuring current | 0~20A (resolution 1mA) | |
Test parameters | Isc, Voc, Pmax, Vm, Im, FF, EFF, Temp, Rs, Rsh |
Detailed Product Description
1. Vacuum absorption and probes touching automatically system
2. Long-arc pulsed and longevity xenon lamp
3. High speed and big power electronic load
4. Data acquisition & processing software
Options and customizations
Manual and automatical sliding tracks match the production line; special request on
customization of survey on various solar cells.
Customize 100ms pulse width 225-1300nm dual light source.
We offer Whole set of Solar Panel Production Line Equipments:
Main Production Line Equipment:
1.Semi/Full Automatic Panel Laminator
2.Solar Cell Tester
3.EL Module Detector Machine
4.Solar Panel Testing Machine
Auxiliary Production Line Equipment:
5.Framing Machine
6.EVA/TPT cutting station
7.EVA/TPT transfer carrier
8.Single Solar cell soldering Welding station (interconnection)
9 .String Solar cell soldering Welding station (bus bar)
10.Soldering ribbon cutting machine
11.Cell string shelf
12.Ready material carrier
13.Module transfer carrier
14.Laying up station
15.Inspection station
16.Cell sorting table
17.Cleaning working table
18.Working table
19.Pneumatic glue gun
20.Compressor
21.Solar Cell Laser dicing (cutting, scribing ) machine (option)
22. Hydraulic pressure forklift
23.Power cable for machine
Machine application:
Software interface:
CE & Class 5A Cetificates of keyland solar simulator:
Packing Site:
Keyland Automatic Solar Simulator:
Will you use this equipment for testing for rooftop or ground solar energy system or just for your solar panel production line?
Do you need to install this machine into automatic solar panel production line? If so, what's its Tekt time?
Keyland is always on the way to offer its best service for distinguished customers in the solar panel assembly line area!