Name: TONVA 500L three layers water tank blow moulding machine
Brand: TONVA
Availability: InStock

Product Details

Welcome To TONVA

Product Description

TVA-500L-III Basic Specification:

* Single Station
* 90mm screw / 30kw motor;

90mm screw / 30kw motor;

* HDPE/HMWHDPE etc material;
* Output(Barrel per hour):(10KG-13KG)---15-19BPH;
* MOOG parison controller 100 points;

* Intelligent temperature control system;

* Take out robot arm strong type;

* Servo motor for saving energy;

TVA-500L-III Working condition:
* Power supply: 380VAC/50Hz (depending on client's country)
* Water Cooling: 20℃(15HP Water chiller)
* Air source: 7.5KW air compressor

TVA-500L-III Technical Parameter
CATEGORY	ITEM	UNIT	TVA-500L-III
Basic Specification	Raw Material	--	HDPE etc
	Dimension	m	86.55.2
	Total Weight	kg	24800
Extrusion System	Diameter of screw	mm	90/90/90
	Screw L/D ration	L/D	30:1
	Screw rotating speed	r/min	10-85
	Plasticizing capacity	kg/h	330
	Drive motor	kw	30*3
	Heating power	kw	23*3
Die Head	Die head material	--	38CrMOALA
	Accumulator capacity	kg	22.5
	Heating power	kw	30
Clamping System	Platen size(W*H)	mm	1200*1400
	Clamping range	mm	650-1850
	Clamping force	kn	800
Power Consumption	Servo pump power	kw	30
	Total power	kw	219
	Average power consumption	kw/h	93
	Air consumption	m³/min	1
	Water consumption	m³/h	3

Basic Working Theory:

This kind of machine is accumulator die head,single station,equipped with PLC control system,operating manual in English,pure hydraulic operated,with MOOG 100points parison controller,running stable.

Detailed Images

Die-head

The die head is made by stainless steel S136H or high quality alloyed steel 38CrMoAIA with high hardness,strong corrosion resistance and long operating life after nitrogen treatment.

Clapming system

Double tie rod hydraulic clamping,the structure is compact,effective mold size increase 25%.

PLC

Adopting PLC to control the action program of the whole machine.

Blowing System

The movements of blowing plasten in vertical level for blowing pin up and down and horizontal level for parison stretch are drive by hydraulic motor.

Moulds Workshop

Main parts brand

Our Service

a. Reply the email and take action in 24 hours.
b. 100% Quality inspection before the shipment.
c. Can training clients operator for free in selle's factory.
d. Engineer overseas is available.
e. Blowing mold and injection mold made original.
f. Auxiliary machines for complete line.
g. Customized design as requirements.

1,Instruction for Installation and Debugging:

Before delivery, TONVA takes responsiblity for debugging of machine, in order to make sure provided machine could be safely and smoothly put into operation.

TONVA also take responsiblity to have debugging overseas, and clients aborad please first send invitation,then provide our engineer with round-trip tickets,accommodation,vehicle and USD80 per day for salary.

2,User Training:

Before delivery,TONVA will take responsibility to indoctrinate technical training to the users so that they could understand machines' features and could operate the machine by themselves.

3,Warranty Period:

The waranty period for TONVA machine is one year with a life long maintenance. If the user requires special quality guarantee, other stipulated warranty period may be made after mutual agreement.