The process begins with a plastic resin hot tube called a parison. The parison is placed within a split mold with a hollow cavity. The mold sides are then clamped together, pinching and sealing the parison tube. Air is blown into the tube, which expands the hot resin wall into the shape of the mold cavity; the mold is cooled with water solidifying the resin into the shape of the part. Once cooled, the part is ejected from the mold and trimmed

1.Plasticizing System:

Screw& Barrel:  High quality nitriding steel 38CrMoAlA for long working life.large L/D ratio design,ensure material equally processed, extruder stably.

Die –head:First-in First-out(FIFO),center-feeder/customized design.

2. Drive mode: 

inverter + hard gear surface decelerator,lower consumption,low noise,balanced and stable screw rotation.

3.Temperature controller:

PID&PWM heating model,accurate control

4.Clamping system: 

Fixed clamping system, three platen,SMC cylinder ,wider space for the mould, install and dismantle the mould easily, linear roll guide rail.

5.PLC and HMI: 

Adopt PLC to control the action program of the whole machine; adopt HMI for communication, parameter setting, modification and picture display; 

6.Electric Parts:

Schneider Brand,high reliability,long working life.

(1) Servo System                        (2) View Stripe               

                                       .

(3) Multiple Layers

• EVOH/PA: make the bottle to fight toxic substances and longer keeping,
  
• Two layer can be designed to reduce the cost and make good surface of bottle, it can use new raw material at outer layer and regrind raw material at inner layer

1. Reply the email and take action in 24 hours;

2. 100% Quality inspection before the shipment;

3. Can trainning clients operator for free in seller`s factory

4. Engineer overseas is avilable

5. Blowing mould and injection mould made orginal 

6. Auxiliary machines for complate line.

7.Custimized design as requirements.