Specifications

gold ore concentrator
1. low power consumption
2. high recovery rate
3. high processing capacity

1. Application of gold ore concentrator

Jig concentrator machine belongs to gravity-based equipments, which can separate mineral based on differing of specific gravity. Saw-tooth wave jig mainly consists of three parts: main frame, driving set and jigging chamber. This machine Can achieve a good result in processing such as placer gold, tungsten, iron, tin, hematite, cope, tantalum-niobium, titanium, manganese, barite, zirconium, chrome and gemstone etc.

 

2. Features of gold ore concentrator

 

1. Compact structure and small occupation area
2. Energy saving and continuous working
3. High recovery, high unit throughput and low water consumption
4. Simple installation and Minimal maintenance requirements
5. Stroke and frequency of stroke can be easily adjusted

 3. Working principle of gold ore concentrator

 

 

 Sawtooth wave jig is revised and manufactured, based on the stratified theory and the adequate analysis of other conventional jigs. The jigging pulsation curve----produced by sawtooth wave jig----is in the shape of sawtooth wave which makes upward water flow quicker than downward water flow. The feature that upward time is shorter than downward time solves the problem that time and action of upward/downward water flows. This breakthrough dramatically amplifies the loose degree and mitigates suction action, which facilitates precipitation of coarse ores and improves ore recovery rate. 

 

 

4. Specification of gold ore concentrator

 

Main Technical Parameters
Model	Jig hutch		Diaphragm		Feeding size(mm)	Amount of make-up water  (m³/t)	Make-up  water  pressure (Mpa)	Capacity (t/h)	Power  (kw)	Dimension(mm)	Weight (Kg)
	Shape	Area (m²)	Stroke (mm)	Frequency  of stroke (r/min)
JT0.57-1	Trapezoid	0.57	8.5-12 10-17 12-21	80-180	<6	1-2	≥0.05	1.5-3	1.5	1550×780×1530	610
JT1-1	Trapezoid	1.04			<10	2-3		2.5-5	2.2	2270×1110×1890	900
JT2-2	Rectangle	2.28			<10	2-4		5-10	3	3225×1550×2050	1640
JT3-1	Trapezoid	3	12-30	50-125	<10	3-6		7.5-15	5.5	2745×2000×3030	3085
JT4-2	Trapezoid	4	25-57		<25	4-8		8-20	7.5	4240×1990×2750	3098
JT4-2S	Trapezoid	4	25-57		<25	4-8		8-20	4.2	4240×1990×2750	3500
JT5-2	Trapezoid	4.86	12-30		<10	3-6		12-25	7.5	3600×2000×2600	4500