Product Details

Specifications

Fluorite Ore Dressing Equipment in XBM
1.Great processing ability
2.Certificate of ISO9001:2008/CE
3.Type:Mineral processing

Fluorite Ore Dressing Equipment in XBM

Part 1 General Introduction of Fluorite Ore Dressing

1. Crushing and Grinding stage

The extracted ore should be primarily crushed by jaw crusher and then secondly crushed by fine crusher. When it gets the reasonable fineness,

it is transported into ball mill by elevating conveyer and feeder, at last, it is milled by ball mill.

2. Classifying stage

The subtle milled ore gets the next procedure: classification. There is a theory that if the weights of solid particles are different, the sedimentations

will be different, and the mixed ore can be classified by screw classifier.

3. Mixing and Floatation stage

The classified ore gets into mixing tank for fully mixing. At this stage, chemical agent for foam can be added. After fully mixing, the slurry will enter

into flotation machine.

When the floatation machine works, the motor drives the impeller to revolve, so the centrifugal effect and negative pressure are produced. On one

hand, ample air is absorbed and mixed with mineral slurry, on the other hand, the mixed mineral slurry is mingled with additive, meanwhile, the

foams are thinning, the mineral is bounded with foams, and floats up to the surface of mineral slurry, the mineralized foam is formed. The liquid

surface can be adjusted with the height of adjustment flashboard, so that the useful foams are scraped with squeegee.

4. Concentrator thickening and drying

Then fluorspar ore is separated from others. Because the separated ore are wet, they should be dewatered by thicker initially, and dried by dryer.

Part 2. Our Services

1. Proving beneficiation technology and consultation;

2. Raw ore testing and evaluation;

3. Site chosen consultation and evaluation;

4. Site design and layout design;