Specifications
Ripple coefficient measurement for DCSoftware calibration
Leading accuracy and stability in the industry and stability in the industry: 0.3%
The input resistance is no less than 200MΩ,the range of current input port is 500~1KV
Voltage Test Range: (0.5~15)KV with resolution of 1V
Current Test Range: (0.1~200)mA with resolution of 0.1μA
Fixed Test Time Measurement Mode: Automatic and manual test modes in the range of 0~999.99s with minimum resolution of 0.01s
Ripple coefficient measurement for DC
Distortion Measurement: Distortion can be measured by an external Distortion Meter connected through 5-pin connector
Software calibration
Electronic load resistor is capable of measuring the transformer capacity of voltage withstand tester
Test range: 3KV, 20/50/100mA
5KV, 20/50/100mA
10kV,20/50mA
Voltage drop measurement method with half load
Model | Voltage range(AC/DC)(kV) | Resolution | Current range(mA) | Resolution | Test time(s) | resolution |
CS9010N | (0.5-15) | 1V | 0.1-200 | 0.1μA | 0-999.99 | 0.01s |
Dimension | width×height×length=285mm×95mm×450mm | |||||
Weight (about) | 5kg |