Programmable Auto Safety Tester, buy CS9933X ELECTRICAL SAFETY TESTER Programmable AC DC IR GR hipot tester Supplier's Choice on China Suppliers Mobile

Product Details

Technical Specifications:

Selecting a Memory Location

If you wish to change the default test parameters, you will need to begin by choosing a memory location first.

There are 30 memory locations each of which contains 99 steps. The steps can be connectedsequentially to form a multi-setp test routine. Only one electrical safety test type can be selected for each step.

Standard PLC interface, optional ports: RS232C, RS485, GPIB, USB
Calibration and prompt function, after twelve-month use, tester can automatically give the prompt information
Test results which maximum can be up to 9999 will be stored into the instrument or sent to PC through RS232 interface
Adopt 240*64 graphic dot-matrix LCD, displaying setting parameters and testing parameters strikingly, visually
LCD contrast, buzzer volume, retention time of PASS signal can be adjusted by keystrokes
Users can name the memory groups as required freely, which maximum can be up to 14
User friendly, support both Chinese and English, simple and convenient operation
The tester will first check whether the input power supply right connected to N, L, G
Output voltage with out of tolerance auto-detection function, when error between actual output voltage and setting voltage exceeds5%±5V, the tester will alarm with out of tolerance of voltage after testing
Automatic detection whether operators touched hi-pot probe, upon hi-pot probe is touched, the tester can’t be performed
Key lock, preventing operators from modifying testing parameters
Optional output voltage modes: Normal mode and Step mode. Normal mode is that tester automatically stops hi-pot output when test time is out; Step mode is according to users’ setting value, tester automatically will switch to second-step voltage output on the first-step voltage when test time is out.
Measuring terminal can choose grounding connection mode or float grounding mode
Users can perform single-step test or multi-step consecutive test with any procedure
Real current capable of measuring capacitive load
Rectification circuit adopts RMS-DC converter, truly reflecting test’s output voltage and measured current value
DC and insulation test with RAMP-HI and CHARGE-LO function
Stabilized voltage output with the stability of 1% with linear power amplifier . The tester satisfies the safety regulation criterion, which requires the crest factor must be in a range between 1.3 and 1.5
0.2s quick discharge after DC withstanding voltage testing and 0.4ms quick cut-off after AC withstanding voltage testing
In AC withstanding voltage testing, Output voltage is within a frequency between 40.0~400.0Hz.(at a resolution of 0.1Hz), Which can satisfy different customers with various requirements

Technical Parameters:

Withstanding Voltage
Model	Output voltage		Accuracy		Test current		Accuracy		Test time
CS9933X	(0.050—5/6)kV(AC/DC)		±(1%+2counts)		(0—20.00/10.00)mA(AC/DC)		±(1%+2counts)		(0.3—999.9) s
CS9921A	(0.050—5/6)kV (AC/DC)		±(1%+2counts)		(0—20.00)mA(AC/DC)		±(1%+2counts)		(0.3—999.9) s
Insulation Resistance					Ground Resistance
Model	Output voltage	Resistance range		Test time	Output current	Test range		Accuracy		Test time
CS9933X	(0.050-1)KV	0-9999MΩ		(0.3—999.9) s	(3-30)A	1-510 mΩ		±(1%+2 counts)		(0.3—999.9) s
CS9921A					(3-30)A	1-510 mΩ		±(1%+2 counts)		(0.3—999.9) s

Theory:

ACCESSORIES

CE Certificate