Product performance

• The FIX work mode: CC(constant current), CV(constant voltage), CR(constant resistance), CP(constant power) and short-circuit test
• Transient (TRAN) test function: the maximum frequency is 10kHz, and the maximum current slope is 5A/us
• LIST functions: The maximum step is 100, the maximum frequency is 1kHz, support the complex program in different mode
• Battery test and discharge capacity test
• External Simulation programming input, 0~10V simulation input, signal band width 10kHz, which realise CC and CV external program.
• Analog monitor output, 0~10V simulation output, including Vmon and Imon
• SENSE remote voltage input, compensate the voltage falling on the input lead.
• External trigger input
• External ON/OFF input
• Over voltage protection(OVP), over current protection(OCP), over power protection(OPP), over temperature protection(OTP) and input reverse protection(REV).
• RS-232/RS485 and USB communication interface, support SCPI command

Perform rapid test in product line, e.g.: tests of switch power supply, power adapter, charger, battery, power electronic component, etc 

Laboratory and econometric test department use, for the purpose of identifying and testing the performance of the above-mentioned products 

Perform aging of power source products,Teaching, research and so on

TECHNICAL PARAMETERS:

 APPLICATIONS:

1. Constant voltage source test, the load adjustment rate, current limiting characteristics, the loop response characteristic
2. Constant current source test, the load adjustment rate, and the transient response
3. Battery test, including the battery life test, and the V/I characteristics, the internal resistance of the battery, the DC-DC simulation of the UPS backup battery
4. Fuel cell test, output impedance and power density
5. Photovoltaic battery test, including the V/I characteristics, the maximum power point, the internal impedance, and the efficiency parameters etc.
6. Charger  test, simulate the battery characteristic.
7. Power transformer, simulate the constant load
8. Other applications, including shunt, circuit breaker, constant current control etc.