PV module tester, buy Hipot and Insulation Resistance Tester for PV Module on China Suppliers Mobile

Product Details

The CS9922G CS9922G-1, AC/DC Withstanding Voltage/Insulation Resistance Tester, is the test instrument that can handle the insuration test with high voltage and high resolution required for the evaluation of the PV module, Cable, Connector, and Junction Box. The CS9922G/9922G-1 are equipped with functions of the AC/DC withstanding voltage testing and the insulation resistance testing accompanied with the features and performance of IEC61730, and both of the two extends additional features and specifications exclusively applied to the PV module testing. Furthermore, the CS9922G, CS9922G-1 improve the current measurement accuracy of the DC withstanding voltage testing from the original 0.100mA to the current 0.010uA.

Up to 5 kV/100 mA(AC) and 6kV/50mA(DC) withstanding voltage test
Perform insulation resistance testing in the range of -50 V to -1000 V / 1 M to 50.00 G
Applies for the testing of IEC61730 standard
High-precision current measurement, 1 μA of the setting resolution for judgement
Rise-time control function makes a voltage to be increased slowly and it will not give effect of the stress to the PV module
The judgement method of the insulation resistance test can be selected by using the current value in addition to the resistance value
The phenomena of voltage appearance by the dielectric absorption, the test time can be up 999.9 seconds

Model			CS9922G					CS9922G-1
ACW	Output voltage	range	0.050kV~5.000kV
		accuracy	±(1.5%read value +5V)
		resolution	1V
	Max output power		100VA(5.000kV/20mA)				500VA(5.000kV/100mA)
	Max test current		20mA				100mA
	Low-current		0~20mA,0=not judgment				0~100mA,0= not judgment
	Range		200uA,2mA,20mA				200uA,2mA,20mA,100mA
	Distortion		Sine waveform
	Distortion		≤2%(No load or pure resistance load)
	Crest factor		1.3~1.5
	Waveform mode		DDS+amplifier
	Rise time		0.3s~999.9s 0=OFF
	Test time		0.3s~999.9s 0=continuous test
	Descend time		0.3s~999.9s 0= OFF
	Interval time		0.0s~999.9s 0= OFF
	Output mode		N mode,G mode
DCW	Output voltage	range	0.050kV~6.000kV
		accuracy	±(1.5%read value +5V)
		resolution	1V
	Max output power		60W(6.000kV/10mA)			300W(6.000kV/50mA)
	Max test current		10mA			50mA
	Leakage current range		2uA,20uA,200uA,2mA,10mA			2uA,20uA,200uA,2mA,20mA,50mA
	Ripple factor		≤5%
	Discharge time		≤200ms
	Maximum charge current		10mA			50mA
	Voltage rise time		0.3s~999.9s 0= OFF
	Test time		0.3s~999.9s 0=continuous test
	Fall time		0.3s~999.9s 0= OFF
	Interval time		0.3s~999.9s 0= OFF
	Delay alarm time		0.3s~999.9s 0= OFF
	Output mode		N mode,G mode
IR	Output voltage	range	0.100kV~1.000kV
		accuracy	±(1.5%read value +5V)
		resolution	1V
	Maximum upper-limit		50.00GΩ
	Maximum lower-limit		50.00GΩ
	Minimum lower-limit		1MΩ
	Voltage rise time		0.3s~999.9s 0=OFF
	Test time		0.3s~999.9s 0=continuous test
	Interval time		0.0s~999.9s 0= OFF
	Auto range		ON/OFF
	Discharge time		≤200ms
Volt meter	Range	AC	0.050kV~5.000kV
		DC	0.050kV~6.000kV
	accuracy		±(1.5%read value +5V)
	resolution		1V
	Displayed value		RMS
Ampere meter	Range	AC	0 ~ 20mA		0 ~ 100mA
		DC	0 ~ 10mA		0 ~ 50mA
	resolution	AC	200uA:0.1uA,2mA:1uA,20mA:10uA
		DC	2uA:0.001uA, 20uA:0.01uA, 200uA:0.1uA, 2mA:1uA, 10mA:10uA	2uA:0.001uA, 20uA:0.01uA, 200uA:0.1uA, 2mA:1uA, 20mA,50mA:10uA
	Accuracy		≥2Ma:±(1.5%+5counts),<2mA:±(2%+5counts)
	OFF SET		The current of the test leads and the accessories can be deducted.
	Test mode		GND:RETURN terminal connect to the outer case FLOAT:RETURN terminal do not be connected to the outer case
OHM METER	Range		1MΩ~50000MΩ
	Resolution		1MΩ~9.999MΩ:0.001MΩ,10MΩ~99.99MΩ:0.01MΩ, 100MΩ~999.9MΩ:0.1MΩ,1000MΩ~9999MΩ:1MΩ 10GΩ~50GΩ:10MΩ
	Accuracy		0.100kV~0.200kV:1MΩ~999MΩ ±5%,1000MΩ~3000MΩ ±10% 0.201kV~0.499kV:1MΩ~999MΩ ±5%,1000MΩ~5000MΩ ±10% 0.500kV~1.000kV:1MΩ~999MΩ ±5%,1000MΩ~9999MΩ ±10% 10000MΩ~50000MΩ ±15%
TIMER	Range		0~999.9s
	Resolution		0.1s
	Accuracy		±(0.1%+50ms)