Programmable & Digital Hipot tester, description about Programmable Hipot Tester CS9914BX on China Suppliers Mobile

Product Details

Specifications

1. Voltage rise and fall as time, seeking for the breakdown points
2. ACW switch to DCW automatically
3. (40.0~400.0)Hz

The input: Optional supply voltage 110V/220V, 40.0~400.0Hz: The tester will first check whether the input power supply right connected to N,L,G automatically after power on and give the prompt information if any of misconnection

1. Electric safety wall detecting function

2. Voltage rises as time, seeking for the breakdown points

3. Voltage falls as time, preventing reverse overshoot

4. Over-zero start prevents the damages for DUT

5. Voltage rise, voltage fall, test and dwell time programmable

6. Lower and upper limit current is programmable

7. ACW to DCW is automatic switching function

8. Standard PLC interface, optional ports: RS232, RS485

( level signal or contact signal can be selected as PLC test signal and if level signal selected, PLC high output level is 24V during the testing )

9. 50 memory groups, 30 steps per group

10. LCD contrast, buzzer volume, the retentive time of PASS signal can be adjusted by keystrokes

11. Control eight memory groups through PLC interface;Test results which maximum can be up to 9999 can be stored inside the tester or sent to the computer through RS232

Model			CS9914BX
ACW	Output voltage	range	0.050kV~5.000kV
		accuracy	±(2% read value+5V)
		resolution	1V
	Max output power		500VA(5.000kV/100mA)
	Test current		100mA
	Low-current		0~100mA,0= not judged
	Range		200uA,2mA,20mA,100mA
	Waveform		Sine wave
	Distortion		≤2%( Unloaded or resistance of the load )
	Crest factor		1.3~1.5
	Waveform mode		DDS+Amplifier
	Rise time		0.3s~999.9s 0= OFF
	Test time		0.3s~999.9s 0= Continuous
	Descend time		0.3s~999.9s 0= OFF
	Interval time		0.0s~999.9s 0= OFF
	Output mode		N mode,G mode
DCW	output voltage	range	0.05kV~6.000kV
		accuracy	±(2% read value+5V)
		resolution	1V
	Maximum power		300W(6.000kV/50mA)
	Test current		20mA
	range		2uA,20uA,200uA,2mA,20mA,100mA
	Ripple coefficient		≤5%
	Discharge time		≤200ms
	Maximum charge current		20mA
	Voltage rise time		0.3~999.9s 0=OFF
	Test time		0.3~999.9s 0= continuous
	Fall time		0.3~999.9s 0= OFF
	Interval time		0.0~999.9s 0= OFF
	Delay alarm time		0.3~999.9s 0= OFF
	Output mode		N mode,G mode
Volt meter	range		0.050kV~5.000kV(AC) 0.050kV~6.000kV(DC)
	Accuracy		±(2% read value+5V)
	Resolution		1V
	Displayed value		RMS
Ampere meter	range	AC	0 ~ 100mA
		DC	0 ~ 50mA
	resolution	AC	200uA:0.1uA, 2mA:1uA, 20mA:10uA , 100mA(50mA):10uA
		DC	2uA:0.001uA, 20uA:0.01uA, 200uA:0.1uA, 2mA:1uA, 20mA:10uA 100mA:10A
	Accuracy		≥2mA ±(2%+5 counts), <2mA ±(3%+5counts)
	Offset current		Current of test leads and accessories can be deducted.
	Mode		GND: RETURN port is connected to case FLOAT: RETURN port is not connected to case
Timer	Range		0~999.9s
	resolution		0.1s
	Accuracy		±(0.1%+50ms)

FREQUENCY: (40.0~400.0)Hz

CE certificate

ACCESSORIES