ITC TS-9216A 16*16 Seamless Best HDMI Matrix Switch

Appearance

ITC TS-9507AR Up to 300 Meters Fiber Optical VGA Extender

Advantages

ITC TS-9507AR Up to 300 Meters Fiber Optical VGA Extender

♦Support single multimode fiber transmission CVBS, YPbPr, VGA signal;
♦Support the transmission of Audio signals, IR signal and RS-232 signals;
♦Single-mode fiber: 2-20 km, while in 1920x1080p @ 60Hz.
♦OM3 multimode fiber: less than 300 meters, at the time of 1920x1080p @ 60Hz.

Product Description

ITC TS-9507AR Up to 300 Meters Fiber Optical VGA Extender

TS-9507AR is a multiformat single component video signal transmission multimode fiber extender, it will transfer CV, Y / C, YPbPr, VGA, DVI, HDMI video signals and Audio signals into optical fiber signal transmission, transmission distance to 300 meters, and is capable of simultaneous transmission of two-way RS-232, two-way infrared signals, can be used with single-core optical transmission fiber optic transmitter or matrix output card;

Specification

ITC TS-9507AR Up to 300 Meters Fiber Optical VGA Extender

Mode	TS-9507AR
VGA Video Output
Interface	HD-DB15 BNC
Signal Type	VGA Video
Gain	0 dB
Interface Bandwidth	380 MHz
Signal Strength	0.63Vpp - 0.9Vpp
Signal Strength	T.M.D.S. +/- 0.4Vpp
Min/Max Level	RGB signal:0V/1.0V;HV signal:0V/5.0V
Impedance	75 ohm
Return Loss	<-30dB@5MHz
Composite Video CV/ Component Video YPbPr Video Output
Interface	HD-DB15 BNC
Signal Type	Composite video CV/component video YPbPr
Gain	0 dB
Interface Bandwidth	CV: 150MHz @ -3dB
Interface Bandwidth	YPbPr: 350 MHz @ -3dB
differential phase error	0.1°,3.58-4.43MHz
differential gain error	0.1%,3.58-4.43MHz
Signal Strength	1Vpp:Composite video(CVBS)
	1Vpp:component video-Y
	0.3Vpp:component video-PbPr/CbCr
Min/Max Level	analog signal:-2V/+2V
Output Impedance	75 Ω
Return Loss	<-30dB@5MHz
Audio Signal Output
Interface	3.8mm Phoenix
Gain	0 dB
Frequency Response	20 Hz ~ 20 kHz
THD+N	0.01% @ 1 kHz (rated voltage condition)
(S/N )Ratio	>80dB at Vin=0 V
Stereo crosstalk	>80dB @ 1 kHz
CMRR	>75dB @: 20 Hz ~ 20 kHz
Signal Type	Stereo (unbalanced connection)
Impedance	Output:50Ω (unbalanced connection)
Max Output Level	+19.5dBu, (unbalanced connection)
Gain Error	±0.1dB @20 Hz ~ 20 kHz
IR
Interface	3 a 3.8mm Phoenix
Signal Type	Input:Digital
Signal Type	Output:Digital
Level Type	PLL Level
Wavelength	850nm
Carrier Frequency	38KHz
RS-232
Interface	3 a 3.8mm Phoenix
Signal Type	Digital
Level Type	RS-232 Level
Signal Direction	two way communication
Baud Rate	Min: 4800bps Max:115200bps
Data Bit
Stop Bit
Correction digit	1
Stream Control	None
Level Delay	None
Level Peak	500 ns
RS-232	+/-15V
Fiber Input Part
Fiber Input connector	SC connector
Fiber Type	Multimode /Single Mode(can be chosen)
Wavelength	Multimode: 850nm /Single Mode: 1310 –1620nm(can be chosen)
Multimode fiber specification	50/125μm
Signal -mode fiber specification	9/125μm
Interface bandwidth	Forward:6.25Gbps, Inversion:3.125Gbps
lock Jitter	<0.15 Tbit
Risetime	<0.3Tbit (20%--80%)
Falltime	<0.3Tbit (20%--80%)
Suggested maximum input range	Multimode fiber:less than 300m,when 1920x1080p@60Hz
Suggested maximum input range	Signal -mode fiber:2-20km,when 1920x1080p@60Hz
specification
Power Supply	Supply adapter,12VDC/2A
Max Power Consumption	4W
Temperature	Storage Operating Temperature: -20°C~ +70°C
Moisture	Storage Operating Moisture:10% ~90%
Dimension	162(L) X 195(W) X 35(H)
MTBF	1 year free warranty, life-long maintenance