Product Details

ITC TS-9507DR 2 to 20 Km DVI Optical Fiber Extender

Appearance

ITC TS-9507DR 2 to 20 Km DVI Optical Fiber Extender

Product Description

ITC TS-9507DR 2 to 20 Km DVI Optical Fiber Extender

TS-9507DR is a support for high-resolution DVI video signals single multimode fiber transmission extender, it will transfer DVI video signals into optical fiber signal transmission, transmission distance up to 300 meters and supports a maximum resolution 1900 × 1200 @ 60Hz, and can simultaneously transmit two-way RS-232, two-way infrared signals, can be used with single core fiber transmission fiber optic transmitter or matrix output card;

Feature

ITC TS-9507DR 2 to 20 Km DVI Optical Fiber Extender

Support for single-mode fiber transmission of high resolution multi-DVI signal;
support the transmission of Audio signals, IR signal and RS-232signals;
single-mode fiber:2-20km,whilein1920x1080p @ 60Hz.
OM3multimode fiber: less than300 meters,at the time of 1920x1080p @ 60Hz.

Specification

ITC TS-9507DR 2 to 20 Km DVI Optical Fiber Extender

Model	TS-9507DR
DVI Video
Interface	DVI-D interface
Supported Protocols	DVI1.0,HDMI1.3a,HDCP1.3
Pixel bandwidth	225MHz , full digital
Interface Bandwidth	6.75Gbps, full digital
Signal Type	DVI 1.0 / HDMI 1.3a normative DVI-D/ HDMI full digital signal T.M.D.S.
Max Supported resolution	HDPC: 1900x1200@60Hz
Max Supported resolution	HDTV: 1920x1080P@60Hz
Clock Jitter	<0.15 Tbit
Risetime	<0.3Tbit (20%--80%)
Falltime	<0.3Tbit (20%--80%)
Signal Strength	T.M.D.S. +/- 0.4Vpp
Min/Max Level	T.M.D.S. 2.9V/3.3V
Impedance	50Ω
The maximum error of the dc bias	+/-15mV
Suggested maximum input range	Less than 10m,when 1920x1080p@60Hz
Audio Signal Output
Interface	5a 3.8mm Phoenix
Gain	0 dB
Frequency Response	20 Hz ~ 20 kHz
THD+N	0.01% @ 1 kHz (rated voltage condition)
(S/N )Ratio	>80dB at Vin=0 V
Stereo crosstalk	>80dB @ 1 kHz
CMRR	>75dB @: 20 Hz ~ 20 kHz
Signal Type	Stereo (unbalanced connection)
Impedance	Output:50Ω (unbalanced connection)
Max Output Level	+19.5dBu, (unbalanced connection)
Gain Error	±0.1dB @20 Hz ~ 20 kHz
IR
Interface	3a 3.8mm Phoenix
Signal Type	Input:Digital Output:Digital
Level Type	PLL Level
Wavelength	850nm
Carrier Frequency	38KHz
RS-232
Interface	3.8mm Phoenix
Signal Type	Digital
Level Type	RS-232 Level
Signal Direction	two way communication
Baud Rate	Min:4800bps Max:115200bps
Data Bit	8a
Stop Bit	1a
Correction digit	None
Stream Control	None
Level Delay	500 ns
Level Peak	+/-15V
Fiber Input Part
Fiber Input connector	SC connector
Fiber Type	Multimode /Single Mode(can be chosen)
Wavelength	Multimode: 850nm /Single Mode: 1310 –1620nm(can be chosen)
Multimode fiber specification	50/125μm
Signal -mode fiber specification	9/125μm
Interface bandwidth	Forward:6.25Gbps,Inversion:3.125Gbps
lock Jitter	<0.15 Tbit
Risetime	<0.3Tbit (20%--80%)
Falltime	<0.3Tbit (20%--80%)
Suggested maximum input range	Multimode fiber:less than 300m,when1920x1080p@60Hz
Suggested maximum input range	Signal -mode fiber :2-20km,when 1920x1080p@60Hz
specification
Power Supply	Supply adapter,12VDC/2A
Max Power Consumption	4W
Temperature	Storage Operating Temperature: -20℃~ +70°C
Moisture	Storage Operating Moisture:10% ~90%
Dimension	162(L) X 195(W) X 35(H)
MTBF	30,000 hours