ITC TS-9216A 16*16 Seamless Best HDMI Matrix Switch

Appearance

ITC TS-9507AT 300 Meters VGA DVI HDMI Fiber Optical Transmitter for Extender

Product Description

ITC TS-9507AT 300 Meters VGA DVI HDMI Fiber Optical Transmitter for Extender

TS-9507AT is a multi-format single component video signal transmission multimode fiber extender, it will transfer CV, Y / C, YPbPr, VGA, DVI, HDMI video signals and Audio signals into optical fiber signal transmission, transmission distance to 300 meters, and is capable of simultaneous transmission of two-way RS-232, two-way infrared signals, can be used with a receiver or a single fiber transmission matrix fiber input cards;

Feature

ITC TS-9507AT 300 Meters VGA DVI HDMI Fiber Optical Transmitter for Extender

Support single multimode fiber transmission CV, Y / C, YPbPr, VGA, DVI, HDMI signal;
Monitor with HDMI-Monitor video output function;
Support the transmission of Audio signals, IR signal and RS-232 signals;
Support site refresh EDID;
Single-mode fiber :2-20 km, while in 1920x1080p @ 60Hz.
OM3 multimode fiber: less than 300 meters, at the time of 1920x1080p @ 60Hz.

Specification

ITC TS-9507AT 300 Meters VGA DVI HDMI Fiber Optical Transmitter for Extender

Model	TS-9507AT
HDMI Video Input
Interface	HDMI-A interface
Support Protocol	HDMI1.3a, HDCP1.3,EDID1.4
Pixel Bandwidth	225MHz, full digital
Interface Bandwidth	3.25Gbps, full digital
Max Supported Resolution	HDPC: 1920x1200P@ 60_24bit
	HDTV: 1920x1080P@60_36bit
Signal Type	HDMI1.3A / T.M.D.S. full digital signal
Signal Strength	T.M.D.S. +/- 0.4Vpp
Min/Max Level	T.M.D.S. 2.9V/3.3V
Impedance	50Ω
DVI Video Input
Supported Protocol	DVI1.0,EDID1.4
Pixel Bandwidth	225MHz, full digital
Interface Bandwidth	3.25Gbps,full digital
Interface	DVI-D connector
Signal Type	DVI-D digital signal T.M.D.S.
Maximum Supported Resolution	HDPC: 1900x1200 @ 60Hz
	HDTV: 1920x1080P @ 60Hz
Signal Strength	T.M.D.S. +/- 0.4Vpp
Minimum / Maximum Level	T.M.D.S. 2.9V / 3.3V
Impedance	50Ω
CV analog Video Input
Standard	NTSC, PAL, SECAM
Signal Type	CVBS
Interface	DB15 male connector to RCA female (Custom Line)
Signal Strength	1V p-p: Composite video (CVBS)
Minimum / Maximum Level	Analog signal: -2V / + 2V
Impedance	75Ω
Support video Input format	480i / NTSC; 480P / NTSC; 576i / PAL; 576P / PAL
Analog YC Video Input
Analog	NTSC, PAL, SECAM
Signal Type	S-VIDEO
Interface	DB15 male connector seat to S terminal (Custom
	Line)
Signal Strength	1VPP (standard value), 0.7VPP-1.6VPP
Impedance	75Ω
Support Video Input Format	480i / NTSC; 480P / NTSC; 576i / PAL; 576P / PAL
Analog YUV Video Input
Standard	NTSC, PAL, SECAM
Signal Type	Component video (YPbPr / YCbCr)
Interface	DB15 male connector to RCA female (Custom Line)
Support Video Input Format	480i / NTSC; 480P / NTSC; 576i / PAL; 576P / PAL;
	720P / NTSC; 1080i / PAL
Signal Strength	1Vpp :( component video Y) 0.3Vpp: (component
	video PbPr / CbCr)
Minimum / Maximum level o	Analog signal: -2V / + 2V
Impedance	75Ω
Analog VGA Video Input
Signal Type	RGBHV
Interface	DB15 female connector
Impedance	75Ω
Support Input Resolution	800x600 @ 60Hz;1024x768 @ 60Hz;
	1280x720 @60Hz; 1280x768 @ 60Hz;
	1280x1024 @ 60Hz; 1400x1050 @ 60Hz;
	1440x900 @ 60Hz; 1600x1200 @ 60Hz;
	1920x1080p @ 60Hz; 1920x1200 @ 60Hz;
	RGBHV
	DB15 female connector
	75Ω
VGA Input
Input level	4.0V-5.0Vpp
Input Impedance	510Ω
Output Impedance	75Ω
Audio Signal
Audio Input	1 channel simulation stereo input, 3.5MM The headset seat
Frequency Response	20Hz - 20KHz ±0.05db
Input Level	2Vrms(MAX)
Serial Port Control
Serial Port Control Interface	3bit 3.8mm interface
Baud Rate	110-115200bps
HDMI Monitor Output Port
Supported Protocol	HDMI1.3a, HDCP1.3,EDID1.4
Pixel Bandwidth	225MHz,full digital
Interface Bandwidth	3.25Gbps, full digital
Signal Strength	T.M.D.S. +/- 0.4Vpp
Minimum / Maximum Level	T.M.D.S. 2.9V/3.3V
Impedance	100Ω
Maximum Supported	800X600@60Hz;1024X768@60Hz;1280X720@60Hz;
Resolution	1280X800@60Hz;1280X1024@60Hz;1366X768@60Hz;
	1440X900@60Hz;1600X900@60Hz;
	1920X1080p@60Hz;
Optical Output Section
Optical Output Port	LC connector
Fiber Type	Multimode / Single Mode (optional)
Wavelength	Multimode 850nm / Single Mode: 1310-1620nm (optional)
Multimode Fiber Standard	50 / 125μm
Single-mode Fiber Standard	9 / 125μm
Interface Bandwidth	Forward: 10.2Gbps, the reverse: 3.125Gbps
Bit Clock Jitter	<0.15 Tbit
Bit Rise Ttime	<0.3Tbit (20% - 80%)
Bit Fall Time	<0.3Tbit (20% - 80%)
Maximum Recommended	OM3 multimode fiber output: less than 500 m, while in
Distance	1920x1080p @ 60Hz
	Single-mode fiber : 2-20 km, while in 1920x1080p @ 60Hz
Specification
Power Supply	Power adapter, 12VDC / 1.5A
Maximum Power Consumption	8W
Temperature	Storage& operation temperature: -20 ℃ ~ + 70 ° C
Humidity	Storage& operation humidity: 10% ~ 90%
Dimensions	162 (L) X 195 (W) X 35 (H)