Product Details

ITC TS-9507HR 2 to 20 Km HDMI Fiber Optic Extender

Appearance

ITC TS-9507HR 2 to 20 Km HDMI Fiber Optic Extender

Product Description

ITC TS-9507HR 2 to 20 Km HDMI Fiber Optic Extender

TS-9507HR is a support for high-resolution single HDMI video signal transmission multimode fiber extender, it will transfer HDMI video signals into optical fiber signal transmission, transmission distance up to 300 meters and supports a maximum resolution 1900 × 1200 @ 60Hz, and can simultaneously transmit two-way RS-232, two-way infrared signals, can be used with single core fiber transmission fiber optic transmitter or matrix output card;

Feature

ITC TS-9507HR 2 to 20 Km HDMI Fiber Optic Extender

Support for high-resolution single-core multimode fiber transmission HDMI signal;
Support the transmission of Audio signals, IR signal and RS-232 signals;
Single-mode fiber: 2-20 km, while in 1920x1080p @ 60Hz.
OM3 multimode fiber: less than 300 meters, at the time of 1920x1080p @ 60Hz.

Specification

ITC TS-9507HR 2 to 20 Km HDMI Fiber Optic Extender

HDMI Video
Interface	HDMI-A interface
Supported Protocols	DVI1.0,HDMI1.3a,HDCP1.3
Pixel bandwidth	225MHz , full digital
Interface Bandwidth	6.75Gbps, full digital
Signal Type	DVI 1.0 / HDMI 1.3a normative DVI-D/ HDMI full digital signal T.M.D.S.
Max Supported resolution	HDPC: 1900x1200@60Hz
Max Supported resolution	HDTV: 1920x1080P@60Hz
Clock Jitter	<0.15 Tbit
Risetime	<0.3Tbit (20%--80%)
Falltime	<0.3Tbit (20%--80%)
Signal Strength	T.M.D.S. +/- 0.4Vpp
Min/Max Level	T.M.D.S. 2.9V/3.3V
Impedance	50Ω
The maximum error of the dc bias	+/-15mV
Recommended maximum input range	Less than 10m ,when 1920x1080p@60Hz
IR
Interface	3.8mm Phoenix
Signal Type	Input: Digital Output: Digital
Level Type	PLL level
Wavelength	850nm
Carrier Frequency	38KHz
RS-232
Interface	3.8mm Phoenix
Signal Type	Digital
Level Type	RS-232 level
Signal Direction	two way communication
Baud Rate	Min: 4800bps Max: 115200bps
Data Bit	8a
Stop Bit	1a
Correction digit	None
Stream Control	None
Level Delay	500 ns
Level Peak	+/-15V
Fiber Input Part
Fiber Input connector	SC connector
Fiber Type	Multimode /Single Mode(can be chosen)
Wavelength	Multimode: 850nm /Single Mode: 1310 –1620nm(can be chosen)
Multimode fiber specification	50/125μm
Signal -mode fiber specification	9/125μm
Interface bandwidth	Forward: 6.25Gbps, Inversion: 3.125Gbps
lock Jitter	<0.15 Tbit
Risetime	<0.3Tbit (20%--80%)
Falltime	<0.3Tbit (20%--80%)
Suggested maximum input range	Multimode fiber: less than 300m,when 1920x1080p@60Hz
Suggested maximum input range	Signal -mode fiber: 2-20km,when 1920x1080p@60Hz
specification
Power Supply	Supply adapter,12VDC/2A
Max Power Consumption	4W
Temperature	Storage Operating Temperature: -20℃~ +70°C
Moisture	Storage Operating Moisture:10% ~90%
Dimension	162(L) X 195(W) X 35(H)
MTBF	30,000 hours