E+H items, buy 2013 Endress+Hauser gauge pressure transmitter PMP75 on China Suppliers Mobile

Product Details

Specifications

Very good reproducibility and long-term stability
High reference accuracy

2013 Endress+Hauser gauge pressure transmitter PMP75

Pressure transmitter with metal sensor

Overload-resistant and function-monitored; Communication via HART, PROFIBUS PA or FOUNDATION Fieldbus

Your benefits

Very good reproducibility and long-term stability
High reference accuracy: up to ±0.075%, as PLATINUM version: ±0.05%
Turn down 100:1, higher on request
Used for process pressure monitoring up to SIL3, certified according to IEC 61508 by TÜV SÜD
HistoROM®/M-DAT memory module
Function-monitored from the measuring cell to the electronics
Continuous modularity for differential pressure, hydrostatic and pressure (Deltabar S, Deltapilot S, Cerabar S), e.g.
- replaceable display
- universal electronic
Quick commissioning thanks to quick setup menu
Menu-guided operation
Extensive diagnostic functions
Device versions in conformity with ASME-BPE

The Cerabar S pressure transmitter is used for the following measuring tasks:

Absolute pressure and gauge pressure in gases, steams or liquids in all areas of process engineering and process measurement technology
Level, volume or mass measurement in liquids
High process temperature
- with typical diaphragm seals up to 400°C (752°F)
High pressure up to 700 bar

International usage thanks to a wide range of approvals

Measuring Principle	Hydrostatic
Characteristic	Digital transmitter with piezoresistive sensor and diaphragm seal Modular transmitter Long term stability Minimum oil volume process connection Enhanced safety via self diagnostic functions Secondary process barrier
Supply / Communication	4...20mA HART: 10,5...45V DC Ex ia: 10,5...30V DC PROFIBUS PA / FOUNDATION Fieldbus: 9...32V DC (Non Ex)
Accuracy	0,075% + influence of diaphragm seal
Long term stability	0,05% of URL/year
Process temperature	-70°C...400°C (-94°F...752°F)
Ambient temperature	-40°C...85°C (-40°F...185°F)
Measuring range	100mbar...700bar (1.5psi...10.150psi)
Max. overpressure limit	1050bar (15.750psi)
Process connection	Thread: G1/2...G2, R1/2, MNPT1/2...MNPT2, NPT1/2...NPT1 Flange: DN25...DN100, ASME 1"...4", JIS 10K
Hygienic	Tri-Clamp DIN11851 Varivent N SMS DRD
Output	4...20mA HART PROFIBUS PA FOUNDATION Fieldbus
Certificates / Approvals	ATEX, FM, CSA, CSA C/US, IEC Ex, TIIS, NEPSI Overfill prevention WHG SIL EN10204-3.1 NACE 3A, EHEDG Marine
Options	HistoROM/M-Dat 4-line digital display SS- or Aluminiumhousing Separate housing
Specialities	Diagnostic functions