E+H items, buy 2013 E+H 4-20mA pressure transmitter FMB51 on China Suppliers Mobile

Product Details

Specifications

Very good reproducibility and long-term stability

E+H 4-20mA pressure transmitter FMB51

Hydrostatic level measurement

Pressure sensor with the CONTITE^TMmeasuring cell
Condensate-resistant offering long-term stability; communication

via HART, PROFIBUS PA or FOUNDATION Fieldbus.

Your benefits

Very good reproducibility and long-term stability
Turn down 100:1
Hermetically sealed CONTITE^TM measuring cell:
- Condensate-resistant and climatic-proofed
- High reference accuracy: ±0.2 %, optionally ±0.1 %
- Minimum temperature effects
End-to-end modularity for differential pressure, hydrostatics and pressure (Deltabar M - Deltapilot M - Cerabar M), e.g.
- replaceable display
- universal electronics
Easy commissioning without the need for an operating tool
Easy and safe menu-guided operation
– on-site via display module
– via 4 to 20 mA with HART
– via PROFIBUS PA
– via FOUNDATION Fieldbus
Wide range of approvals (e.g. ATEX, FM, CSA, etc.) for international use
Usage in drinking water: KTW, NSF
Used for process pressure monitoring up to SIL2,
certified to IEC 61508 Edition 2.0 and IEC 61511 by
TÜV NORD

The hydrostatic pressure sensor is used for the following measuring tasks:

Hydrostatic pressure measurement in liquids and paste-like media in all areas of process engineering, process measuring technology, pharmaceuticals and the food industry

Level, volume or mass measurements in liquids

Measuring Principle	Hydrostatic
Characteristic	Pressure transmitter for pressure or hydrostatic level measurement with flush mounted metallic CONTITE measuring cell: - hermetically welded - absolute condensation tight - climate-resitant - long-term stable - Lowest temperature influences Rod version
Supply / Communication	4...20mA HART: 10,5...45V DC Ex ia: 10,5...30V DC PROFIBUS PA / FOUNDATION Fieldbus: 9...32V DC (Non Ex)
Accuracy	Standard 0,2% Optional 0,1%
Long term stability	0,05% of URL/year
Process temperature	-10°C...85°C (14°F…212°F)
Ambient temperature	-40°C...85°C (-40°F...185°F)
Measuring range	100mbar...10bar (1.5psi...150psi)
Max. overpressure limit	40 bar (600 psi)
Process connection	Thread: G1 1/2, MNPT1 1/2 Flange: DN40...DN100, ASME 2"...4", JIS 10K
Output	4...20 mA HART PROFIBUS PA FOUNDATION Fieldbus
Certificates / Approvals	ATEX, FM, CSA, CSA C/US, IEC Ex, TIIS, INMETRO, NEPSI Overfill prevention WHG SIL EN10204-3.1 NACE Drinking water
Options	Separate housing Initial device settings Overvoltage protection
Specialities	Modularity to differential pressure and process pressure devices (replacable display, universal electronics) diagnostic functions Hermetically sealed Contite measuring cell (condensate-resistant and climatic-proofed)
Application limits	If pressurized, usage of two pressure transmitters to measure the differential pressure (electronic dP) Observe ratio head pressure : hydrostatic pressure