E+H items, buy E+H absolute pressure transmitter with metal sensor PMP71 on China Suppliers Mobile

Product Details

Specifications

Very good reproducibility and long-term stability
High reference accuracy

E+H absolute pressure transmitter with metal sensor PMP71

Product description

Pressure transmitter with metal sensor

Overload-resistant and function-monitored; Communication via HART, PROFIBUS PA or FOUNDATION Fieldbus

Your benefits

Very good reproducibility and long-term stability
High reference accuracy: up to ±0.075%, as PLATINUM version: ±0.05%
Turn down 100:1, higher on request
Used for process pressure monitoring up to SIL3, certified according to IEC 61508 by TÜV SÜD
HistoROM®/M-DAT memory module
Function-monitored from the measuring cell to the electronics
Continuous modularity for differential pressure, hydrostatic and pressure (Deltabar S, Deltapilot S, Cerabar S), e.g.
- replaceable display
- universal electronic
Quick commissioning thanks to quick setup menu
Menu-guided operation
Extensive diagnostic functions

Cerabar S PMP71 with MID Parts Certificate:

Pressure transmitter with metal sensors

Overload-resistant and function-monitored; Communication via HART; Subcomponent suitable for custody transfer measurement with NMi approval

Your benefits:

Very good reproducibility and long-term stability
High reference accuracy: up to ±0.075%, as PLATINUM version: ±0.05%
Used for process pressure monitoring up to SIL3, certified to IEC 61508 by TÜV SÜD
HistoROM®/M-DAT memory module
Function-monitored from the measuring cell to the electronics
Quick commissioning with Quick Setup menu
Menu-guided operation

Field of application

The Cerabar S pressure transmitter is used for the following measuring tasks:

Absolute pressure and gauge pressure in gases, steams or liquids in all areas of process engineering and process measurement technology
Level, volume or mass measurement in liquids
High pressure up to 700 bar
International usage thanks to a wide range of approvals

Cerabar S PMP71 with MID Parts Certificate:

Cerabar S serves as a component of a system suitable for custody transfer measurement, for highly accurate measurement of pressures, and finds application in

custody transfer. It satisfies the applicable requirements in accordance with OIML R117-1 Edition 2007 (E) and EN 12405-1/A1 Edition 2006.

The Parts Certificate is issued on the basis of the following standards:

WELMEC guide 8.8 "General and Administrative Aspects of the Voluntary System of Modular Evaluation of Measuring instruments under the MID".
OIML R117-1 Edition 2007 (E) "Dynamic measuring systems for liquids other than water".
EN 12405-1/A1 Edition 2006 "Gas meters – Conversion devices – Part 1: volume conversion".

The Cerabar S pressure transmitter is used for the following measuring tasks:

Absolute pressure in gases or liquids in all areas of process engineering and process measurement technology

International usage thanks to a wide range of approvals

Measuring Principle	Hydrostatic
Characteristic	Digital transmitter with piezoresistive sensor and welded metallic membrane Modular transmitter Long term stability Enhanced safety via self diagnostic functionsSecondary process barrier
Supply / Communication	4...20mA HART: 10,5...45V DC Ex ia: 10,5...30V DC PROFIBUS PA / FOUNDATION Fieldbus: 9...32V DC (Non Ex)
Accuracy	Standard 0,075% Platinum 0,05%
Long term stability	0,05% of URL/year
Process temperature	-40°C...125°C (-40°F...257°F)
Ambient temperature	-40°C...85°C (-40°F...185°F)
Measuring range	100mbar...700bar (1.5psi...10.500psi)
Max. overpressure limit	1050bar (15.750psi)
Process connection	Thread: G1/2...G2, R1/2, MNPT1/2...MNPT2, R1/2 Flange: DN25...DN80, ASME 1"...4", JIS 10K...20K
Output	4...20mA HART PROFIBUS PA FOUNDATION Fieldbus
Certificates / Approvals	ATEX, FM, CSA, CSA C/US, IEC Ex, TIIS, NEPSI Overfill prevention WHG SIL EN10204-3.1 NACE Marine
Options	HistoROM/M-Dat 4-line digital display SS- or Aluminiumhousing Separate housing
Specialities	Diagnostic functions