Specifications

ground source heat pump unit
1)Using brand accessories
2)Low energy consumption
3)little vibration,low noise
4)high COP&EER

ground source heat pump unit

 

Type: modular  cooling,heating&making hot water

Cooling Capacity: 33~2340kw (2.8×10⁴kCal/h~201.2×10⁴kCal/h  OR  112,600Btu/h~800,000 Btu/h)

Heating Capacity:  37~2632kw (3.1×10⁴kCal/h~226.4×10⁴kCal/h  OR  126,300Btu/h~806,000 Btu/h)

 

Compressor Brand: American Scroll Copeland, Danfoss,Bitzer (selected as per request)

Evaporator&Condenser: Famous brand Sino-US joint venture

 

Power:  3/N/PE AC380V/220V (±10%) 50HZ (can be changed as per request)

Refrigerant:  Environmental protection refrigerants (R134a R407c or R410a)

Noise: ≤60dB (A)EER up to 5.8   COP up to 4.6

  

Competitive Advantages

A. Heat resource: From groundwater, surface water (rivers, lakes, sea) and soil;

B. Usage: can be used for heating and cooling of radiant floor, radiator, fan coil units and other end of the form, also based on the demand, preparation for free hot water;

C. Compressor: named brand semi-closed screw-type or fully closed scroll-type

D. Running advantage: Low energy consumption, stable operation, little vibration, low noise. Equipped with advanced protection module

E. Using high quality imported components, system with optimal design, stable operation of unit using environment-friendly refrigerant, no waste discharge.

F. Environment protection: No combustion, no smoke, no boiler or cooling tower makes the environment more beautiful.

G. Low charge: One-time investment is only 1/2 to 1/3 of traditional air conditioning, the cost to run is 1/2 to 1/3 of traditional methods.

H. Widely Application: hotels, restaurants, hospitals, office buildings, theaters, stadiums, residential quarters, textile, food, medicine, metallurgy, chemicals and boiler works etc.

 

Note:

1.Unit cooling capacity and compressor power consumption calibration conditions

  chilled water inlet temperature 12°C, outlet water temperature 7°C

  Cooling water inlet temperature 18°C, outlet water temperature  29°C.

2. Unit heating capacity and compressor power consumption calibration conditions

  hot water temperature of 40°C, outlet water temperature 45°C

  cooling water inlet temperature 15°C, outlet water temperature 7°C

3. When the cooling water temperature range is different from the calibrate mode, press the design performance curves to select their unit refrigeration / heat and power consumption.

4. Heat recovery can be added with requirements.