Product Details

The ZXWL W202Uis a WLANdual-band access point using 3G/4G network as backhaul, providing local content storage and other communication interfaces.

Moreover,the ZXWL W202U can be used as LTE CPE connecting terminals and LTE network by Ethernet ports to achieve video surveillance and pass back sensor data of Internet of Things.

l 3G/4G network as backhaul

l PPP dialing

l High performance wireless access

l Powerful network security function

l Excellent performance

l Flexible power supply mode

l Outstanding RF performance

l Coordinated/Stand-alone AP mode software switchable

Radio Indexes

Standard	IEEE 802.11a/b/g/n/ac
Standard	802.11b:BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM 802.11ac: OFDM (BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM)
PHY Data Rate	802.11b: 1, 2, 5.5, 11Mbps (DSSS)
	802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54Mbps (OFDM)
	802.11n: MCS0 – MCS23 up to 300Mbps
	802.11ac: MCS9 ~ MCS0,NSS=1~3, up to 867Mbps
Radio Chain	2X2 MIMO 2 Spatial Streams
	MRC for improved receiver performance
	Cyclic delay diversity for improved downlink RF performance
	STBC for increased range and reception
WLAN Band	2.4-2.484 GHz
	5.15-5.85 GHz
	Dual-radio 802.11ac indoor
Channelization	HT 20MHz/40MHz
RF Transmit Power	2.4 GHz: Max 100mW (actual output power may be limited by regulatory domain requirements) 5 GHz: Max 100mW (actual output power may be limited by regulatory domain requirements)
RF Transmit Power	1. Integrated WLAN antennas, supporting MIMO 2x2 2. LTE antenna is external.
Encryption	64/128-bit WEP
	WPA-PSK, WPA2-PSK
	WPA-Enterprise, WPA2-Enterprise
	TKIP and AES/CCMP

Physical Indexes

Interface	2xRJ45, 1xUSB, 1xMicroSD, 1xSIM, 1xRS232, 2xRP-SMA LTE RF interface, 1xRP-SMA GPS interface
Storage	Expandable storage > 64GB
Environmental Condition	Indoor IP41
	Work temperature: -20°C to 55°C
	Humidity: 5 to 95% no condensing
Power Rating	< 10W (typical)
Power Supply	9-36V DC
Dimensions	150mm (L) x 250mm (W) x 50mm (H)
Weight	2 kg

Wireless Backhaul

TDD-LTE	Data rate: DL (100Mbps)/UL (50Mbps); Band 38: 2570-2620 MHz Band 39: 1880-1920 MHz Band 40: 2300-2400 MHz Band 41: 2500-2690 MHz
TD-SCDMA	Band 34: 2010-2025 MHz Band 39: 1880-1920 MHz Band 40: 2300-2400 MHz
UMTS	Band 1/2/5
FDD-LTE	Band 1/2/3/5/7
Interoperability	Supporting automatic interoperability between different system

Software Features

Radio Function	• 200+ concurrent users
	• Up to 16 SSIDs per band
	• Coordinated AP/Stand-alone AP mode software switchable
	• Automatic 3G/4G PPPoE dialing
	• 802.1Q VLANs
	• Static, DHCP (OPTION43/60) IP assignment
	• User and throughput based load balance
	• Dynamic user Bandwidth Limitation
	• SNTP protocol
	• Dynamic frequency selection (DFS) optimizes the use of RF spectrum
	• Auto RF power adjustment, step size 1dB
	• Local APN configuration
	• Compatible with existing WLAN service authentication and billing flow
	• Passing through NAT L3 networking
	• Power down alarming
Location	• GPS location
Storage	• Local content storage
Storage	• Local Portal
Security	• Layer 2 wireless client isolation
	• 802.1x authentication using EAP-SIM/AKA,PEAP, TLS, TTLS
	• 802.11i Wi-Fi WPA2 or WPA
	• WAPI-Wireless LAN Authentication and Privacy Infrastructure
	• VLAN and SSID bundling
	• Mixed access of multiple security mode
	• Rogue AP detection
	• Device security: abnormal situation self test
QoS	• IEEE 802.1p prioritization
	• IEEE 802.11e EDCF
	• WMM Wi-Fi Multi Media
Management	• IPV4/IPV6 dual stacks
	• Embedded HTTP/HTTPs and Telnet
	• SNMP v2c, SNMP v3, MIB-II with Traps
	• NTP Network Time Protocol
	• Configuration and software upgrades from Access Controller