Product Details

1 General

The WE2011 is a single-band indoor AP with 2.4G for coverage. This high-performance 802.11n AP features lowering the installation time and cost of a room WLAN, and can be easily mounted in wall and match the decor of any room. Developed under the unified ZTE CSP software platform, it can easily switch and operate as coordinated or stand-alone AP, and provide a stable and manageable carrier-grade WLAN.

Easy and Fast Installation

Dual-software backup

2.4G Single Band

20 mW RF Output Power

2X2 MIMO 2 Spatial Streams

802.11b/g/n up to 300Mbps

10/100Mbps Ethernet

48V DC PoE Power Supply

Coordinated / Stand-alone AP mode software switchable

1 Software Features

Radio Functions	• 100+ concurrent users
	• Up to 16 SSIDs
	• Coordinated / Stand-alone AP mode software switchable
	• Load balance
	• 802.1Q VLANs and VLAN Trunk
	• Static , DHCP (OPTION43/60) IP assignment
	• Dynamic user Bandwidth Limitation
	• Dynamic frequency selection (DFS) optimizes the use of RF spectrum
	• A-MPDU
	• Auto RF power adjustment, configurable step of 1 dBm
	• IETF CAPWAP Taxonomy and Architecture compatibility
Security	• Layer 2 wireless client isolation
	• 802.1x authentication using EAP-SIM/AKA, PEAP, TLS, TTLS
	• 802.11i Wi-Fi WPA2 or WPA
	• WAPI-Wireless LAN Authentication and Privacy Infrastructure
QoS	• IEEE 802.1p prioritization
	• IEEE 802.11e EDCF
	• Wi-Fi Multi Media (WMM)
Management	• IPV4 / IPV6 dual stacks
	• Embedded HTTP / HTTPs and telnet
	• SNMP v2c, SNMP v3, MIB-II with Traps
	• NTP Network Time Protocol
	• Configuration and software upgrades from Access Controller

1 Technical Indices

1.1 Radio Indices

Standards	IEEE 802.11b/g/n
Standards	802.11b:BPSK, QPSK, CCK 802.11g/n: BPSK, QPSK, 16-QAM, 64-QAM
PHY Data Rate	802.11b: 1,2,5.5, 11Mbps (DSSS)
	802.11g: 6,9,12,18,24,36,48,54Mbps (OFDM)
	802.11n: MCS0 to MCS15 up to 300Mbps
Radio Chains	2X2 MIMO 2 Spatial Streams
	MRC for improved receiver performance
	Cyclic delay diversity for improved downlink RF performance
	STBC for increased range and reception
Frequency Band	2.4-2.484GHz
Frequency Band	Dual-radio, single-band 802.11n indoor wall-in
Channelization	HT 20MHz / 40MHz
RF Transmit Power	2.4G Hz : Max 20 mW
Encryption	64/128-bit WEP
	WPA-PSK, WPA2-PSK
	WPA-Enterprise, WPA2-Enterprise
	TKIP and AES/CCMP

1.2 Physical Indices

RF Interface	Internal antenna
Network Interface	2 * RJ-45 for Fast Ethernet, one for WAN and the other for LAN
Network Interface	Auto-MDIX and POE
Other Interface	2 * RJ-11 phone interface, one for input and one for output
Other Interface	Reset button: push to reset, push and hold on for 5s to restore the default configuration;
Environmental Condition	Indoor IP30
	Work Temperature -10°C to 45°C
	Humidity 5 to 95% non-condensing
Power Rating	3.0 W(Typical )
Power Supply	48V DC PoE 802.3af/at
Dimensions	41.5 (D) x 54.5 (W) x 65.5 (H) mm
Weight	0.105 kg