Specifications

1.polyurethane adhesive
2.environmental adhesive
3.attend the auto exhibition
4.good quality and save cost

Two-component polyurethane adhesive for handwork, component proportion ratio is 100:40
Features	Material-A	Material-B
Physical nature	orange-red viscous liquid	brown-yellow liquid
Color	color based on your request to configure
Viscosity	800-1000MPa.S(25°C)	25-50MPa.S(25°C)
Density	1.02g/ml	1.27g/ml
Package(as your request)	Plastic bucket or Tin bucket	Plastic bucket ,Tin bucket, Plastic pots
Weight(as your request)	25/50/200kg	10/20/80kg
Purpose	For air filter
Storage	1. Material-A and material-B can store up 3-6 months.
	2. To appropriate indoor storage above 15°C

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Usage:

1.Material-A should stirred evenly with plastic hand electric drill, material-B can shake, before used.

2. Open the electro caloric plate temperature to 40-50 degrees, in winter material-A and material-B with a small container to preheat.

3. Wipe the mould with release agent

4. material-A and material-B are mixed at the mixture ratio of 100:40 ratio, then add 40% talcum powder, with 2800 rev / min motor to mix, mixing time determined by the amount of adhesive, per 100g of adhesive is approximately 7-10 seconds .

5. Pour the Mixed liquid into mould, then put the paper element and give a little pressure on it.

6.10 minutes later you can bring the mould down.

Storage:

1. Material-A and material-B can store up 3-6 months.

2. To appropriate indoor storage above 15°C.

Mobile phone:86-15175883233

Phone:86-0318-7850507

Fax:86-0318-7524169

Web:

Welcone to take the free sample to test the properties to make the right decision.