Fluorine removal filter for water filter,wastewater treatment equipment

Specifications

Fluorine removal filter for water filter

 Purification Principle:

I company production of CF type fluoride filter, when HanFuLiang less than 10 mg/l of water through the filter, fluorine and adsorption fluoride in adsorbent surface, generating the undissolved fluoride, and the water content of fluoride than 1.0 mg/l, up living standards for drinking water.
When fluoride ability to reduce certain limit, namely except fluorine capacity of less than regulations, renewable agent can be recycled, restore adsorbent fluoride ability.

The technical indexes:
1, raw water HanFuLiang less than 10 mg/L
2, filter speed 5 ~ 10 m/h
3, working pressure 0.1 ~ 0.3 MPa
4, regeneration time 10 to 20 min
5, renewable strength 8 ~ 10 L/m2
Application:
Often as centralized with the groundwater for water to remove in the drinking water supplies of fluorin ion overweight part of the special equipment. Can also be used to containing fluorine industry waste water and arsenic drinking water treatment. The main technical parameters, see table (HCF type drinking fluoride equipment main technical parameters).

Features:

The device adopts ShengLiuShi activated alumina adsorption method, and USES the CO2 gas adjust PH value and NaOH water for regenerative agent. Has the following features:
1, advanced technology, compact structure, adsorption capacity, covers an area of less, unit area of water production rate is high.
2, the operation is simple, operation cycle is long, stable discharging water, no mud slag discharge.
3, regeneration time is short, the consumption of drug, less water consumption and no secondary pollution generated.
4, can a single on or more a series, parallel use, by using the engineering construction in phases and and water supply system combination supporting etc. Characteristics.