Wood Sawdust Rice Husk Drying Machine
1.The general introduction of Wood Straw Grass Leaves Sawdust Coffee Husk Drying Machine
The Wood Straw Grass Leaves Sawdust Coffee Husk Drying Machine, also called pipe dryer or flash dryer for sawdust , is professionally designed for drying materials like sawdust, rice hull, wood chips, wood shaving, wheat straw, and corn stalks, paddy straw , etc. Moisture in the raw materials of less than 40% can be drying one time to meet the requirement for wood pellets production. In addition,Wood Straw Grass Leaves Sawdust Coffee Husk Drying Machine is considered as the most inexpensive sawdust dryer, which is highly recommended for bio-pellets production capacity less than 1000kg per hour.
2.Features of Wood Straw Grass Leaves Sawdust Coffee Husk Drying Machine
1. This Wood Straw Grass Leaves Sawdust Coffee Husk Drying Machine can reduce the moisture of the materials to 8-12% one time with the advantages of lower consumption and high efficiency.
2. Moisture evaporative power can be from 50kg/h to 1500kg/h.
3. The Wood Straw Grass Leaves Sawdust Coffee Husk Drying Machine can be changed to any angle based on the production field, less floor area and easier installation.
3.Flow chart of Wood Straw Grass Leaves Sawdust Coffee Husk Drying Machine
1.Put the raw material contain a certain amount of moisture into the feed;
2.the dried raw material comes out of the outlet.
4.Raw material of Wood Straw Grass Leaves Sawdust Coffee Husk Drying Machine
The Raw material could be rice husk ,wood sawdust , woodchips ,coffee husk etc.
5.Main datas of Wood Straw Grass Leaves Sawdust Coffee Husk Drying Machine
Model | HGJ-4 | HGJ-6 | HGJ-8 ( double –stove) |
Output (Kg/hour) | 250-300 | 400-500 | 600-800 |
material diameter | < 3mm& < 5mm | < 3mm& < 5mm | < 3mm& < 5mm |
Motor power | 4kw | 5.5kw | 7.5kw |
Weight | 1200kg | 1600kg | 2100kg |
Size of the machine | 10*1.0*2.0m | 15*1.0*2.0m | 21*1.2*2.5m |
6. The structure Of the Wood Straw Grass Leaves Sawdust Coffee Husk Drying Machine
The whole Wood Straw Grass Leaves Sawdust Coffee Husk Drying Machine mainly consists of hot wind stove, material feeder, drying pipe, dying cyclone, cyclone separator and controlling system. When the sawdust pass through the pipeline, the wet moisture will be removed from the material and the dried sawdust is discharged from the cyclone separator. This Wood Straw Grass Leaves Sawdust Coffee Husk Drying Machine adopts two time circulate heating system, strengthening the heat and mass transfer rate, material moisture at 50% can be dried into the requirement of making wood pellets/briquettes at one time, greatly save the labor. We have two types of sawdust dryer for the customer choose.
7.Wood Straw Grass Leaves Sawdust Coffee Husk Drying Machine in charring process
1.Put the raw material into the crusher machine make it becomes sawdust (3-5mm);
2.If the sawdust moisture large than 8-12%,so dry it;
3.Put the dried raw material into the briquette machine ;
4.Put the briquette into the carbonization stove making charcoal.
Gongyi Xiaoyi Mingyang Machinery plant is located in Zhengzhou.Henan province. Our machineryplant is specialize in WOOD BRIQUETTE MACHINE 26 years.
There have production line of makingwood charcoal briquette(including crusher , dryer , wood briquette machine, carbonization stove) ,
production line of making wood pellet (including crusher, dryer , wood pellets machine , dust separation plant and packaging machine)
production line of making coal ball briquette(includingvertical crusher, mixing machine, coal briquette pressing machine and dryer machine for coal briquette)
and other equipment such as screw conveyor, belt conveyor, scrap conveyor , sawdust carbonization stove, floating fish feed machine and so on.
Our machines have the best quality and we have got many certification such as CE, ISO, BV.
For one set we packed in standard container.For more sets machines, we pack them in the standard container.
(1)Pre-sales service
a. Sales team will suggest suitable project.
b. Technical team analyse and design special molds for you.
c. Pick you up at airport, arrange hotel-booking.
d. Other travel arrangements.
(2)After-sales service
a. Assist you build up factory and production line.
b. Install and maintain machines.
c. Training your workers to achieve skillful operation.
d. Offer technical support through telephone or online videos at any time.
(3)Our shipping terms
We can accept EXW FOB and CIF terms.
Also our freight forwarding has high effieiency and quick shipping speed.
If stock machine, we can send out your products within 5 days.
If you need special molds or customized producion line, the delivery time according to you machine quantity, but we will send out as soon as possible.
(4)Our payment terms
T/T, L/C, Western Union or others.
If you need our product , you can communication with me in any way as follows.